AD: Rolls-Royce Deutschland Ltd & Co KG | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Sat, Jun 06, 2020

AD: Rolls-Royce Deutschland Ltd & Co KG

AD 2020-12-03 -- Manufacturer Found That A P30 (Air Pressure) Sense Line Could Become Partially Blocked

The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG Trent XWB-97 model turbofan engines.

This AD requires updating electronic engine control (EEC) software. This AD was prompted by the manufacturer's finding that a P30 (air pressure) sense line could become partially blocked with a mixture of ice and water, which would cause a time-lag in the P30 signal, interfering with the fuel flow limit calculations. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective June 18, 2020.

Supplementary Information: The European Union Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, has issued EASA AD 2020-0035, dated February 26, 2020 (referred to after this as “the MCAI”), to address an unsafe condition for the specified products.

The MCAI states: During ground tests, it was found that a P30 (air pressure) sense line could become partially blocked with a mixture of ice and water, which would cause a time-lag in the P30 signal, interfering with the fuel flow limit calculations. This condition, if not corrected, could lead to loss of thrust control, possibly resulting in reduced control of the aeroplane. To address these potential unsafe conditions, Rolls-Royce defined a new EEC SW, XWB_97-7.0, P/N RRY23XWB0001024, which corrects these issues. For the reasons described above, this [EASA] AD requires updating the EEC SW. This [EASA] AD also prohibits installation of affected SW on any engine.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

Aero-News: Quote of the Day (05.03.24)

"We are reaching out to you today on behalf of the Popular Rotorcraft Association because we need your help. We are dangerously close to losing a critical resource that if lost, wi>[...]

ANN's Daily Aero-Term (05.03.24): UAS Traffic Management (UTM)

UAS Traffic Management (UTM) The unmanned aircraft traffic management ecosystem that will allow multiple low altitude BVLOS operations and which is separate from, but complementary>[...]

ANN's Daily Aero-Linx (05.03.24)

Aero Linx: Society of Aviation and Flight Educators (SAFE) SAFE is a member-oriented organization of aviation educators fostering professionalism and excellence in aviation through>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC