AD: Airbus SAS Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Tue, Sep 07, 2021

AD: Airbus SAS Airplanes

AD 2021-17-04 Requires A One-Time Inspection Of The Area Around The Latch Hook Mounting Holes Of The Forward And Aft Door Frames

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A321-211, -231, and -232 airplanes.

This AD was prompted by a report of false drill starts found around the latch hook mounting holes of certain door frames of the fuselage due to erroneous manufacturing processes. This AD requires a one-time inspection of the area around the latch hook mounting holes of the forward and aft door frames to detect damage from false drill starts, and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective October 5, 2021.

Supplementary Information: EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0222, dated October 14, 2020 (EASA AD 2020-0222) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Airbus SAS Model A321-211, -231, and -232 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus SAS Model A321-211, -231, and -232 airplanes. The NPRM published in the Federal Register on March 8, 2021 (86 FR 13229). The NPRM was prompted by a report of false drill starts found around the latch hook mounting holes of certain door frames of the fuselage due to erroneous manufacturing processes. The NPRM proposed to require a one-time inspection of the area around the latch hook mounting holes of the forward and aft door frames to detect damage from false drill starts, and repair if necessary, as specified in EASA AD 2020-0222.

The FAA is issuing this AD to address damage from false drill starts, which could result in reduced structural integrity of the airplane. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC