EASA Certifies Ardiden 3G Engine | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Jun 20, 2017

EASA Certifies Ardiden 3G Engine

Has Been Selected For Use In Russian, Chinese Helicopters

Safran Helicopter Engines has received EASA engine type certification for its Ardiden 3G engine, which powers Russian Helicopters' Ka-62. The helicopter made its official maiden flight on 25 May 2017. Since its first ground test, the Ardiden 3 maturation and certification campaign has accumulated more than 8500 hours of test. Thanks to this extensive test phase, the Ardiden 3G will demonstrate a high level of maturity at entry into service.

Unveiled in 2010, the Ardiden 3 engine family is the only new-generation 1,700 to 2,000 shaft horsepower engine range designed for the six to nine ton helicopter. In 2011 the 3G variant was selected by Russian Helicopters to power the Ka-62. Another variant, the 3C / WZ16, has also been selected by Chinese manufacturer Avicopter to power its AC352 which made its first flight in December 2016.

"This is a very significant event for the Ka-62 and it is the result of intensive work of the Safran Helicopter Engines Team. EASA certification gives us an opportunity to accelerate the certification of Ka-62 according to international standards and to bring it to the foreign market. Concerning the Russian market, we suppose that in the near future Safran's engine will be also approved in accordance with the requirements of Federal Air Transport Agency", commented Andrey Boginsky, Russian Helicopters CEO.

Commented Bruno Even, Safran Helicopter Engines CEO, "this first certification is a major milestone in the Ardiden 3 program. The engine is also performing extremely well and represents a major step for the Ka-62 flight test program. We are fully committed to support Russian Helicopters as it approaches entry into service."

Ardiden 3 engines represent a very effective combination of new and mature technologies, combining exceptional performance with low operating and maintenance costs, with a TBO (Time between overhaul) of 5,000 hours at entry-into-service. Ardiden 3 engines also deliver at least 10 % better fuel consumption over engines operating in the same power range.

(Image provided with Safran news release)

FMI: www.safran-group.com

Advertisement

More News

Airborne-Flight Training 05.09.24: ERAU at AIAA, LIFT Diamond Buy, Epic A&P

Also: Vertical Flight Society, NBAA Maintenance Conference, GA Honored, AMT Scholarship For the first time, students from Embry-Riddle’s Daytona Beach, Florida, campus took t>[...]

ANN's Daily Aero-Term (05.07.24): Hazardous Weather Information

Hazardous Weather Information Summary of significant meteorological information (SIGMET/WS), convective significant meteorological information (convective SIGMET/WST), urgent pilot>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

NTSB Final Report: Cessna 150

(FAA) Inspector Observed That Both Fuel Tanks Were Intact And That Only A Minimal Amount Of Fuel Remained In Each Analysis: According to the pilot, approximately 8 miles from the d>[...]

Aero-News: Quote of the Day (05.08.24)

“Pyka’s Pelican Cargo is unlike any other UAS solution on the market for contested logistics. We assessed a number of leading capabilities and concluded that the Pelica>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC