Conway Crash Result of Missing Gasket | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-NextGen-05.21.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Mon, Dec 04, 2023

Conway Crash Result of Missing Gasket

Inattentive Maintenance Kills Again

A Piper PA-28R-201 crashed in Conway, South Carolina on September 14, 2022, causing fatal injuries to 2.

"Shortly after departure, on the first flight following maintenance, the pilot reported a loss of engine power," reads the NTSB report. "The pilot attempted a forced landing onto a gravel road, but the airplane impacted trees and powerlines on final approach. The airplane came to rest against a berm and a post crash fire ensued."

During their investigation, the NTSB found a good deal of engine damage, oil, and heat discoloration. Following the clues, they believe that the aircraft was returned to service while missing a vital part, despite two pairs of eyes supposedly assuring the work. An A&P had completed work on the Piper Arrow III, and it was signed off on by a director with Inspection Authorization.

"A review of the airplane maintenance records revealed that after a certificated airframe and powerplant mechanic had completed the work on the airplane, the Director of Maintenance, an airframe and powerplant mechanic with inspection authorization, signed off the paperwork to return the airplane back to service. The return to service entry stated that the vacuum pump had been removed but did not address the installation of the drive pad gasket or vacuum pump cover."

The report serves a sobering reminder to double check your work, if nothing else. "In an interview, the mechanic who completed the removal of the vacuum pump and installation of the vacuum pump cover stated that when he removed the vacuum pump, the gasket was still attached to it. He cleaned the mating surface of the cover and drive pad and then installed the cover. He stated that he thought he had replaced the gasket. A review of the work order showed that although the cover had been ordered, there was no record of a gasket being ordered."

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (05.19.24): Back-Taxi

Back-Taxi A term used by air traffic controllers to taxi an aircraft on the runway opposite to the traffic flow. The aircraft may be instructed to back-taxi to the beginning of the>[...]

Aero-News: Quote of the Day (05.19.24)

“Our WAI members across the nation are grateful for the service and sacrifice of the formidable group of WASP who served so honorably during World War II. This group of brave>[...]

Aero-News: Quote of the Day (05.20.24)

“Many aspiring pilots fall short of their goal due to the cost of flight training, so EAA working with the Ray Foundation helps relieve some of the financial pressure and mak>[...]

ANN's Daily Aero-Term (05.20.24): Blind Speed

Blind Speed The rate of departure or closing of a target relative to the radar antenna at which cancellation of the primary radar target by moving target indicator (MTI) circuits i>[...]

ANN's Daily Aero-Linx (05.20.24)

Aero Linx: International Airline Medical Association (IAMA) The International Airline Medical Association, formerly known as the Airline Medical Directors Association (AMDA) was fo>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC