NTSB: Loose Components May Have Led To Walton/CGS Hawk Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Mon, Aug 14, 2006

NTSB: Loose Components May Have Led To Walton/CGS Hawk Accident

Locking Collar, Mods Under Investigation

It could have been a case of loose wiring that contributed to the homebuilt crash that killed Wal-Mart heir John Walton last year.

The NTSB's factual report, available at the FMI link below, also identifies a series of modifications to the CGS Hawk Arrow that may have also contributed to the June 27, 2005 mishap in Wyoming's Grand Teton National Park.

The manufacturer says it could have been a loose control collar or the vast modifications Walton made to the aircraft after a hard landing months earlier in Nebraska that contributed to the fatal crash.

The NTSB reports the aircraft's fabric cockpit enclosure panels had been removed prior to the accident, including a section of fabric between the wings.

"We never tested a Hawk Arrow in the configuration he was flying it," the manufacturer said. He added an improperly installed locking collar may mean Walton "...could have been pulling full back on the stick, but all it did was take up some slack. There may have been no response at the other end, no movement of the elevators."

The investigation continues.

FMI: Read The Complete NTSB Factual Report

Advertisement

More News

Aero-News: Quote of the Day (05.09.24)

"Fly-by-wire flight, coupled with additional capability that are being integrated into ALFA, provide a great foundation for Bell to expand on its autonomous capabilities. This airc>[...]

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Linx (05.09.24)

Aero Linx: B-21 Raider The B-21 Raider will be a dual-capable penetrating strike stealth bomber capable of delivering both conventional and nuclear munitions. The B-21 will form th>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC