Mon, Dec 14, 2020
AD 2020-25-03 Retains The Requirements Of AD 2020-01-17, Expands The List Of Affected Parts To Be Checked
The FAA is superseding Airworthiness Directive (AD) 2020-01-17, which applied to all Airbus SAS Model A318, A319, A320, and A321 series airplanes.
AD 2020-01-17 required repetitive checks of the pressure gauges on the inflation reservoir of each emergency escape slide/raft to determine the amount of pressure and, depending on findings, accomplishment of applicable corrective actions. This AD retains the requirements of AD 2020-01-17, expands the list of affected parts to be checked, and provides optional terminating action for the repetitive checks; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by the determination that certain parts that were not identified in AD 2020-01-17 are also subject to the unsafe condition. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective December 28, 2020.
Supplementary Information: The FAA issued AD 2020-01-17, Amendment 39-19823 (85 FR 5310, January 30, 2020) (AD 2020-01-17), which applied to all Airbus SAS Model A318, A319, A320, and A321 series airplanes. AD 2020-01-17 required repetitive checks of the pressure gauges on the inflation reservoir of each emergency escape slide/raft to determine the amount of pressure and, depending on findings, accomplishment of applicable corrective actions. The FAA issued AD 2020-01-17 to address insufficient reservoir pressure in an emergency escape slide/raft, which would prevent the deployment of the emergency escape slide/raft during an emergency, possibly resulting in injury to the occupants.
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]