Thu, Nov 21, 2019
Probable Cause For Uncontained Engine Failure Determined In An NTSB Meeting Earlier This Week
Boeing has released a statement following the NTSB's determination of a probable cause in an uncontained engine failure aboard SWA 1380, which resulted in the fatal injury of a passenger aboard the airplane.
"We commend the NTSB for its thorough investigation into this accident. Our common goal is to help prevent similar events from happening in the future," the company said in the statement.
"Safety and quality are Boeing’s top priorities and Boeing is committed to working closely with the FAA, engine manufacturers, and industry stakeholders to implement enhancements that address the NTSB’s safety recommendations.
"Actions include:
- Supporting engine manufacturers’ recommendations for fan blade inspections.
- Enhancements being introduced into the inlet and fan cowl designs to enhance their ability to withstand an engine fan blade out event as well as to increase the overall capability of these structures.
"All 737 NGs are safe to continue operating normally as the issue is completely mitigated by the fan blade inspections. In addition, Boeing is working on the design enhancements to fully address the safety recommendation from the NTSB. Once approved by the FAA, that design change will be implemented in the existing NG fleet over the longer term. This issue is limited to the 737 NG and does not affect the 737 MAX.
"Our thoughts remain with the family and friends of Jennifer Riordan, who died from her injuries, with those who were hurt, and with all of those onboard. We are committed to doing our part in making sure an event like this never happens again."
(Image provided with Boeing news release)
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]