NTSB To Investigate Runway Incursions, Separation Incident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Sat, Aug 30, 2008

NTSB To Investigate Runway Incursions, Separation Incident

Close Call Over Atlantic Averted Thanks To TCAS

The National Transportation Safety Board is investigating two runway incursion incidents and an aircraft separation incident, all of which occurred in the last two days.

In the first runway incursion incident, a commuter jet narrowly missed a general aviation aircraft during a nighttime landing at Fresno Yosemite International Airport in California. On August 28, 2008, at approximately 9:07 pm Pacific Daylight Time, a Piper PA-46 landed on runway 29R. Before the aircraft had exited the runway, the tower controller cleared a SkyWest Canadair CRJ-200 commuter jet to land on the same runway.

The CRJ pilot saw the Piper and veered to the right side of the runway, missing the aircraft by an estimated 15 feet, wingtip to wingtip. The incident occurred at night with 10 miles visibility.

In the second runway incursion incident, a pilot of a general aviation aircraft landed on a closed runway at the Reading Regional Airport/Carl A. Spaatz Field, in Reading, PA. On August 27, 2008, at about 4:25 pm Eastern Daylight Time, a Cessna 172 landed on runway 18 -- which was closed -- after receiving a clearance to land on the closed runway by the tower controller. The runway had been closed for approximately four weeks due to construction activity. The incident occurred during day with 10 miles visibility.

In the aircraft separation incident, two commercial jets came within 1 minute lateral separation over the Atlantic Ocean in a non-radar environment where 15 minutes of lateral separation is required.

On August 28, 2008, at approximately 6:37 pm Atlantic Standard Time, Transaero flight 554, a Russian-registered Boeing 747-400, and Delta Air Lines flight 485, Boeing 737-800 en route from New York's Kennedy Airport to Port of Spain, Trinidad and Tobago, came within zero feet vertical and 1 minute lateral separation at an altitude of 33,000 feet about 179 miles north of San Juan, Puerto Rico.

The Transaero 747 descended 200-300 feet after receiving an alert from its Traffic Collision Avoidance System (TCAS).

NTSB investigators are responding to each of the incident locations.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (04.25.24): Airport Rotating Beacon

Airport Rotating Beacon A visual NAVAID operated at many airports. At civil airports, alternating white and green flashes indicate the location of the airport. At military airports>[...]

ANN's Daily Aero-Linx (04.25.24)

Aero Linx: Fly for the Culture Fly For the Culture, Inc. is a 501(c)(3) non-profit organization that serves young people interested in pursuing professions in the aviation industry>[...]

Klyde Morris (04.22.24)

Klyde Is Having Some Issues Comprehending The Fed's Priorities FMI: www.klydemorris.com>[...]

Airborne 04.24.24: INTEGRAL E, Elixir USA, M700 RVSM

Also: Viasat-uAvionix, UL94 Fuel Investigation, AF Materiel Command, NTSB Safety Alert Norges Luftsportforbund chose Aura Aero's little 2-seater in electric trim for their next gli>[...]

Airborne 04.22.24: Rotor X Worsens, Airport Fees 4 FNB?, USMC Drone Pilot

Also: EP Systems' Battery, Boeing SAF, Repeat TBM 960 Order, Japan Coast Guard H225 Buy Despite nearly 100 complaints totaling millions of dollars of potential fraud, combined with>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC