Sun, Jan 25, 2015
AD NUMBER: 2015-01-01
PRODUCT: Certain Boeing Model 777-200 and -300 series airplanes.
ACTION: Final Rule
SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2011-09-11, for the products listed above.
AD 2011-09-11 required repetitive inspections for hydraulic fluid contamination of the interior of the strut disconnect assembly; repetitive inspections for discrepancies of the interior of the strut disconnect assembly, if necessary; repetitive inspections of the exterior of the strut disconnect assembly for cracks, if necessary; corrective action if necessary; and an optional terminating action for the inspections.
This new AD adds, for certain airplanes, an inspection of the side and top cover plates to determine if all cover plate attach fasteners have been installed, and installing any missing fasteners including doing an inspection for damage, and repair if necessary. This AD was prompted by reports of side and top cover plates installed with missing fastener bolts, which results in an unsealed opening on the system disconnect assembly.
The FAA is issuing this AD to detect and correct hydraulic fluid contamination, which can cause cracking of titanium parts in the system disconnect assembly; and also to detect and correct missing fasteners, which results in unsealed openings on the system disconnect assembly. Both unsafe conditions can compromise the engine firewall and result in fire hazards for both the engine compartment and the strut.
DATES: This AD is effective February 26, 2015.
FMI: AD
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]