Wed, Dec 02, 2020
AD 2020-24-09 Requires Inspecting The Rudder Flight Control Cables And The EPS Wiring For Damage
The FAA is adopting a new airworthiness directive (AD) for certain Piper Aircraft, Inc., Model PA-34-220T airplanes.
This AD was prompted by a report of damage to the rudder flight control cables and the emergency power supply (EPS) system wiring due to inadequate clearance from the EPS wiring harness. This AD requires inspecting the rudder flight control cables and the EPS wiring for damage, replacing damaged cables and wires if necessary, and re-routing the EPS wiring harness to ensure proper clearance between the EPS and the rudder flight control cables. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective January 5, 2021.
Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain serial-numbered Piper Aircraft, Inc., Model PA-34-220T airplanes. The NPRM published in the Federal Register on July 28, 2020 (85 FR 45353). The NPRM was prompted by a report of damage to the rudder flight control cables and the EPS system wiring due to inadequate clearance from the EPS wiring harness. Use of the rudder flight control cable and the motion of the cable rubbing against the EPS wiring can wear through the rudder flight control cable insulation and cause an electrical path to ground.
The flow of the electrical current can burn (arc) through the rudder flight control cable strands, eventually severing the rudder flight control cable. In the NPRM, the FAA proposed to require inspecting the rudder flight control cables and the EPS wiring for damage, replacing damaged cables and wires if necessary, and re-routing the EPS wiring harness to ensure proper clearance between the EPS and the rudder flight control cables. This condition, if not addressed, could result in electrical arcing between the EPS and the rudder flight control cables with consequent failure of the rudder flight control system. This failure could cause loss of yaw control and lead to loss of control of the airplane during an engine out condition/operation. The FAA is issuing this AD to address the unsafe condition on these products.
More News
Say Altitude Used by ATC to ascertain an aircraft's specific altitude/flight level. When the aircraft is climbing or descending, the pilot should state the indicated altitude round>[...]
Aero Linx: European Air Law Association (EALA) EALA was established in 1988 with the aim to promote the study of European air law and to provide an open forum for those with an int>[...]
From 2023 (YouTube Version): The Life, Death, Life, Death, and Life of a Glorious Warbird In 1981, business-owner Jim Tobul and his father purchased a Chance-Vought F4U Corsair. Mo>[...]
Also: USCG Retires MH-65 Dolphins, Irish Aviation Authority, NATCA Warns FAA, Diamond DA42 AD This summer, history enthusiasts will have a unique opportunity to experience World Wa>[...]
Also: WACO Kitchen Bails, French SportPlane Mfr to FL, Dynon-Advance Flight Systems, Innovation Preview Bobby Bailey, a bit of a fixture in sport aviation circles for his work with>[...]