NTSB Prelim: Boeing A75 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Thu, Oct 07, 2021

NTSB Prelim: Boeing A75

While Inverted, The Airplane Entered Another Flat Spin And Did Not Recover

Location: Delta, CO Accident Number: CEN21FA424
Date & Time: September 17, 2021, 08:00 Local Registration: N19BB
Aircraft: Boeing A75 Injuries: 1 Fatal
Flight Conducted Under: Part 91: General aviation - Personal

On September 17, 2021, about 0800 central daylight time (CDT), a Boeing A75 airplane, N19BB, was destroyed when it was involved in an accident near Delta, Colorado. The commercial pilot sustained fatal injuries. The personal local flight was conducted under the provisions of Title 14 Federal Code of Regulations Part 91.

The airplane took off from runway 3 at Blake Field Airport (AJZ), Delta, Colorado. Two witnesses observed the airplane climb out and begin aerobatic maneuvers about 5 miles to the northeast of AJZ. Both witnesses stated that the airplane began a loop maneuver, and at the top of the loop while inverted, the airplane entered a flat spin. They observed the airplane recover from that spin. The airplane then gained altitude and they observed the airplane begin another loop maneuver. At the top of the loop, while inverted, the airplane entered another flat spin and did not recover. The airplane impacted rugged sloped terrain about 5 miles to the northeast of AJZ. First responders located the airplane wreckage and notified authorities. There were no radio or distress calls heard from the pilot.

The wreckage was found resting inverted on a 45-degree slope. The fuselage was oriented downslope and crushed from impact forces. The engine was partially separated from its fuselage mounts. The empennage section was bent rearward, the upper wings were bent upward, and lower wings were separated from their respective mounting braces, consistent with a flat impact. Flight control continuity was confirmed from the cockpit to all flight control surfaces. The engine throttle control was found in the idle position. Engine rotation continuity (compression resistance) was confirmed. The smell of fuel was present. The airplane was not equipped with inverted fuel or oil supply systems.

According to an acquaintance of the pilot, he and the pilot flew the airplane to AJZ  a few days prior to the accident flight. The acquaintance stated that the airplane operated normally.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Linx (05.04.24)

Aero Linx: JAARS Nearly 1.5 billion people, using more than 5,500 languages, do not have a full Bible in their first language. Many of these people live in the most remote parts of>[...]

NTSB Final Report: Quest Aircraft Co Inc Kodiak 100

'Airplane Bounced Twice On The Grass Runway, Resulting In The Nose Wheel Separating From The Airplane...' Analysis: The pilot reported, “upon touchdown, the plane jumped back>[...]

Aero-News: Quote of the Day (05.04.24)

"Burt is best known to the public for his historic designs of SpaceShipOne, Voyager, and GlobalFlyer, but for EAA members and aviation aficionados, his unique concepts began more t>[...]

Aero-News: Quote of the Day (05.05.24)

"Polaris Dawn, the first of the program’s three human spaceflight missions, is targeted to launch to orbit no earlier than summer 2024. During the five-day mission, the crew >[...]

Read/Watch/Listen... ANN Does It All

There Are SO Many Ways To Get YOUR Aero-News! It’s been a while since we have reminded everyone about all the ways we offer your daily dose of aviation news on-the-go...so he>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC