CASA Urgent AD: Pilatus PC-12 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Wed, Feb 16, 2005

CASA Urgent AD: Pilatus PC-12

AD Number: AD/PC-12/45
Subject:
Windshield De-Ice System Wiring - Inspection/Replacement
Applicability: Model PC-12 and PC-12/45 airplanes, Manufacturer Serial Numbers (MSN) 322 through MSN 400 inclusive.
Requirement: 1. Perform an inspection for signs of heat damage of the wires, splices and related link wires in the area of terminal block (TB152) in accordance of paragraph 3 of Pilatus PC-12 Service Bulletin (SB) 30-009.
2. Perform a check of the wires and related link wires to verify that wires of correct size (American Wire Gauge [AWG]) are installed as specified in paragraph 3.B. of SB 30-0009 and Wiring Manual (WM) 30-40-00 and 30-40-10.
3. If any signs of heat damage or incorrect wiring are found during the Requirements 1 and 2 inspections, replace them in accordance with SB 30-009. Note: FOCA Switzerland AD HB-2005-079 refers.
Compliance: For Requirements 1 and 2 - Within the next 10 hours time-in-service but not later than three calendar months after the effective date of this Directive. For Requirement 3 - Before further flight. This Airworthiness Directive becomes effective on 18 February 2005. Background: The Swiss Federal Office for Civil Aviation (FOCA) has advised of a report of a Co-Pilot’s windshield de-ice system failure. The cause of the defect was found in an overheating of the return wire from the windshield heating system. Investigation revealed that the installation of the wiring in question was not in accordance with the specifications given in the applicable wiring diagrams (incorrect AWG). This could result in heat damage of the wiring and as a consequence, electrical arcing or possible fire in the overhead panel in the flight-compartment.

FMI: http://casa.gov.au/avreg/aircraft/ad/ADfiles/UNDER/PC-12/PC-12-045.pdf


Advertisement

More News

ANN's Daily Aero-Term (04.25.24): Airport Rotating Beacon

Airport Rotating Beacon A visual NAVAID operated at many airports. At civil airports, alternating white and green flashes indicate the location of the airport. At military airports>[...]

ANN's Daily Aero-Linx (04.25.24)

Aero Linx: Fly for the Culture Fly For the Culture, Inc. is a 501(c)(3) non-profit organization that serves young people interested in pursuing professions in the aviation industry>[...]

Klyde Morris (04.22.24)

Klyde Is Having Some Issues Comprehending The Fed's Priorities FMI: www.klydemorris.com>[...]

Airborne 04.24.24: INTEGRAL E, Elixir USA, M700 RVSM

Also: Viasat-uAvionix, UL94 Fuel Investigation, AF Materiel Command, NTSB Safety Alert Norges Luftsportforbund chose Aura Aero's little 2-seater in electric trim for their next gli>[...]

Airborne 04.22.24: Rotor X Worsens, Airport Fees 4 FNB?, USMC Drone Pilot

Also: EP Systems' Battery, Boeing SAF, Repeat TBM 960 Order, Japan Coast Guard H225 Buy Despite nearly 100 complaints totaling millions of dollars of potential fraud, combined with>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC