Urgent CASA AD: CL-600/65 - Control Column Microphone Jack Modification | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Tue, Jun 14, 2005

Urgent CASA AD: CL-600/65 - Control Column Microphone Jack Modification

AD/CL-600/65 Control Column Microphone Jack Modification - FAA STC SA4900SW 8/2005 TX

Applicability: Model CL-600-1A11 (CL-600), CL-600-2A12 (CL-601) and CL-600-2B16 (CL-601-3A, CL-601-3R, and CL- 604) aeroplanes; modified by United States federal Aviation Administration (FAA) Supplemental Type Certificate (STC) SA4900SW, excluding serial number 3025 and including, but not limited to, the following serial numbers:

Model CL-600-1A11 (CL-600)
CL-600-2A12 (CL-601)
CL-600-2B16 (CL-601-3A, CL-601-3R and CL-604)

Serial Numbers
1054, 1059, 1069, 1071, 1080
3012, 3013, 3034, 3045, 3050, 3051, 3061, 3065
5012, 5046, 5060

Requirement: 1. Revise the Limitations and Normal Procedures section of the Aircraft Flight manual (AFM) to contain the following information: "Before every flight, perform a visual check of the microphone jack assembly on the pilot's and co-pilot's control column to detect damage that may interfere with movement of the control column, including downward bending of the receptacle. This check must be performed by the flight crew. Any damage that may interfere with the movement of the control column must be repaired before further flight."

Revision of the AFM may be accomplished by inserting a copy of this Directive in the AFM. Note 1: Bombardier Advisory Wire AW600-00-2247, Revision 2, dated March 24, 2005, provides additional information on damaged microphone jack assemblies and interference of damaged assemblies with movement of the control column.

2. Modify the microphone jack assembly and perform all related investigative actions and applicable corrective actions, in accordance with the Accomplishment Instructions of Raytheon Service Bulletin SB 23-3727, dated May 2005, except as provided by Requirement 3. Once this modification is complete, the AFM revision required by Requirement 1 may be removed from the AFM.

3. If any cracking is found during any inspection required by this Directive or if the distance between existing and new fastener holes is less than the limit specified in Raytheon Service Bulletin SB 23-3727, dated May 2005, repair the cracking or carry out any other applicable corrective action. Note 2: Contact Raytheon Aircraft Company Arkansas Technical Support in accordance with SB 23-3727 for advice regarding repair or corrective action. Note 3: FAA AD 2005-11-04 Amdt 39-14106 refers.

Compliance: For Requirement 1 - Within five days after the effective date of this Directive. For Requirement 2: a. If damage that may interfere with the movement of the control column is found during any visual check performed in accordance with the AFM revision - Before further flight. b. If damage that may interfere with the movement of the control column is not found during any visual check performed in accordance with the AFM revision - Within 15 days or 15 hours time in service after the effective date of this Directive, whichever occurs first. For Requirement 3 - Before further flight immediately following discovery of the anomaly.

This Airworthiness Directive becomes effective on 16 June 2005.

Background: This Directive is issued to prevent a damaged microphone jack assembly from interfering with movement of the control column, which could result in loss of control of the aeroplane.

The FAA has received a report indicating that a Model CL-600-1A11 (CL-600) aeroplane experienced a rejected take-off and subsequently overran the runway. The nose landing gear collapsed, and the forward fuselage was damaged as a result of the incident. The flight crew reported that, when they attempted to take off, the control column would not move aft beyond the neutral position. Investigation revealed that the microphone jack assembly installed on the co-pilot's control column was bent downward, which restricted the aft movement of the control column.

The microphone jack assembly on the affected aeroplane was installed incidental to STC SA4900SW. Therefore, all Bombardier Model CL-600-1A11 (CL-600), CL-600-2A12 (CL-601), and CL-600-2B16 (CL-601-3A, CL-601-3R and CL-604) aeroplanes modified by that STC may be subject to the same unsafe condition.

FMI: http://casa.gov.au/airworth/airwd/NEW/urgent.htm

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC