NASA Supports UAS Fire Mapping Efforts In CA Fire | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.13.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Nov 07, 2006

NASA Supports UAS Fire Mapping Efforts In CA Fire

Altair Unmanned Plane Snaps Photos Of Fatal Arson Blaze

Here's a definite example of the good that unmanned aerial vehicles (UAVs) can do in dangerous situations. Aero-News has learned a team led by NASA and US Forest Service scientists recently collected real-time, visible and infrared data from sensors onboard a remotely piloted aircraft over the Esperanza Fire in Southern California.

The Esperanza Fire, an arson-set fire that claimed the lives of five firefighters, was ignited on Thursday, October 26. Whipped by powerful Santa Ana winds, it spread over 40,200 acres, or roughly 62 square miles, destroying 34 homes and 20 other structures.

The California Governor's Office of Emergency Services and the Esperanza Fire Incident Command Center requested NASA's imaging and fire mapping assistance.

The Altair Unmanned Aircraft System -- built and operated by General Atomics Aeronautical Systems Inc. of San Diego, CA -- was prepared to fly in less than 24 hours. The flight was facilitated by the Federal Aviation Administration, which assures the safety of unmanned aircraft system flights in the National Airspace System.

Recent changes to the FAA's organizational structure allowed the approval to be expedited, while ensuring no degradation of safety and without imposing any new temporary flight restrictions.

From an altitude of 43,000 feet, the wildfire sensor collected and sent 100 images and more than 20 data files containing the location of the fire perimeter over a 16-hour period on October 28 and 29. The data were delivered in real time through a satellite communications link. NASA and Forest Service specialists worked to familiarize the fire management team with accessing capabilities and sensor data format. The data from the NASA system were used by the Esperanza Fire Incident Command Center to map fire behavior and direct resources to critical areas on the fire.

The flight project was sponsored and funded by NASA's Science Mission Directorate. The team consisted of NASA's Ames Research Center, Moffett Field, CA; NASA's Dryden Flight Research Center, Edwards, CA; The National Interagency Fire Center, Boise, ID; US Forest Service Remote Sensing Laboratory, Salt Lake City, UT; California Governor's Office of Emergency Services; California Department of Forestry and Fire Protection, Sacramento, CA; and General Atomics Aeronautical Systems Inc.

FMI: www.ga-asi.com/, http://nirops.fs.fed.us/UASDemo/

Advertisement

More News

Sierra Space Repositions Dream Chaser for First Mission

With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

ANN's Daily Aero-Term (05.11.24): IDENT Feature

IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC