AD: Gulfstream Aerospace Corporation Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Wed, Nov 11, 2020

AD: Gulfstream Aerospace Corporation Airplanes

AD 2020-23-04 Prompted By A Report Of Misassembled Impellers Onto The Shaft Of The Fuel Boost Pump

The FAA is adopting a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation (Gulfstream) Model GVII-G500 and Model GVII-G600 airplanes.

This AD requires revising your existing airplane flight manual (AFM) and airplane maintenance manual (AMM) to include information pertaining to the fuel boost pump. This AD was prompted by a report of misassembled impellers onto the shaft of the fuel boost pump during production. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective November 24, 2020.

Supplementary Information: The FAA was notified by Gulfstream of the possibility of misassembled impellers onto the shaft of fuel boost pumps used in the production of GVII-G500 and GVII-G600 airplanes. The supplier of fuel boost pumps discovered two misassembled fuel boost pumps on two different make/models of non-Gulfstream aircraft. The Gulfstream GVII-G500 and GVII-G600 fuel boost pumps are very similar in design and are manufactured in the same facility using the same manufacturing processes, so the same condition could exist on the Gulfstream fuel boost pumps.

A misassembled fuel boost pump could result in a woodruff key becoming dislodged and causing friction between static and rotating components internal to the fuel boost pump. This friction could generate heat or sparks inside the fuel tank, which, if the pump were to run dry, could result in a fuel tank fire or fuel tank explosion.

The unsafe condition, if not addressed, could result in a potential source of ignition in the fuel tank and may lead to fire or explosion.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC