AD: Hélicoptères Guimbal Helicopters | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Sat, Oct 02, 2021

AD: Hélicoptères Guimbal Helicopters

AD 2021-19-07 Requires Replacing An Affected MR Non-Rotating Scissor Link With A Serviceable Part

The FAA is adopting a new airworthiness directive (AD) for certain Hélicoptères Guimbal Model CABRI G2 helicopters.

This AD was prompted by a report that, during scheduled maintenance on two helicopters, cracks were found on a certain main rotor (MR) non-rotating scissor link. This AD requires replacing an affected MR non-rotating scissor link with a serviceable part. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective November 4, 2021. The Director of the Federal Register approved the incorporation by reference of a certain document listed in this AD as of November 4, 2021.

Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Hélicoptères Guimbal Model CABRI G2 helicopters. The NPRM published in the Federal Register on July 23, 2021 (86 FR 38943). In the NPRM, the FAA proposed to require replacing an affected MR non-rotating scissor link with a serviceable part. The NPRM was prompted by EASA AD 2019-0186, dated July 30, 2019 (EASA AD 2019-0186), issued by EASA, which is the Technical Agent for the Member States of the European Union, to correct an unsafe condition for certain Hélicoptères Guimbal Model CABRI G2 helicopters. EASA advises that, during scheduled maintenance on two helicopters, cracks were found on the MR non-rotating scissor link, part number (P/N) G41-10-200. The suspected root cause for the cracking is corrosion due to stress induced by the mounting of the metal bushings inside the lug hole. To address this issue the manufacturer modified the design of the MR non-rotating scissor link to reinforce the lugs and replace the metal bushings with plastic bushings. Cracking of a MR non-rotating scissor link, if not addressed, could result in failure of that scissor link, resulting in reduced control of the helicopter.

Accordingly, EASA AD 2019-0186 requires replacement of affected MR non-rotating scissor links with serviceable parts.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Term (04.26.24): DETRESFA (Distress Phrase)

DETRESFA (Distress Phrase) The code word used to designate an emergency phase wherein there is reasonable certainty that an aircraft and its occupants are threatened by grave and i>[...]

Aero-News: Quote of the Day (04.26.24)

"General aviation is at the forefront of developing and introducing innovative technologies that will transform the entire aviation industry..." Source: Kyle Martin, Vice President>[...]

ANN's Daily Aero-Term (04.27.24): Direct

Direct Straight line flight between two navigational aids, fixes, points, or any combination thereof. When used by pilots in describing off-airway routes, points defining direct ro>[...]

ANN's Daily Aero-Linx (04.27.24)

Aero Linx: Women in Corporate Aviation Women in Corporate Aviation support individuals seeking career advancement and professional development in the business aviation industry. Me>[...]

Aero-News: Quote of the Day (04.27.24)

“We would like to thank the many volunteers that help throughout the year to pull off the event, as well as the several reviewers, judges, and SURVICE staff that provide team>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC