Mon, Oct 06, 2014
AD NUMBER: 2014-20-07
PRODUCT: All the Boeing Company Model 747-200C and -200F series airplanes.
ACTION: Final Rule
SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2010-03-05 for the products listed above. AD 2010-03-05 required, for the upper chords of the upper deck floor beam of section 41, an inspection for cracking of certain fastener holes, and corrective action if necessary; and repetitive replacements of the upper chords, straps (or angles), and radius fillers of certain upper deck floor beams and, for any replacement that is done, inspections for cracking, and corrective actions if necessary.
This new AD adds repetitive inspections of the upper chords of the upper deck floor beam of Section 42, repetitive replacements of the upper chords, post-replacement inspections, and corrective actions if necessary. This new AD also adds post-replacement inspections for section 41 and reduces certain compliance times. This AD was prompted by a determination that the upper deck floor beams are subject to widespread fatigue damage (WFD), the existing inspection program is not sufficient to maintain an acceptable level of safety, and the upper chords of the upper deck floor beam of section 42 are subject to the unsafe condition.
The FAA is issuing this AD to detect and correct cracking of the upper chords and straps (or angles) of the floor beams, which could lead to failure of the floor beams and consequent loss of controllability, rapid decompression, and loss of structural integrity of the airplane.
DATES: This AD is effective November 7, 2014.
FMI: AD
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]