FAA Proposes New Helicopter Certification Standards | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Fri, Nov 03, 2017

FAA Proposes New Helicopter Certification Standards

Seeks To Reduce The Burden On Applicants For New Rotorcraft Designs

The FAA has posted a proposal in the Federal Register to to amend the certification standards of normal and transport category helicopters. The proposed changes are necessary to address modern designs currently used in the rotorcraft industry and would reduce the burden on applicants for certification of new rotorcraft designs. The proposed changes would reduce or eliminate the need for certain special conditions currently required to obtain certification of modern rotorcraft. The proposed changes would also incorporate the requirements of equivalent level of safety findings that the FAA has imposed as conditions for approving certain design features.

The FAA proposes to revise regulations in title 14 Code of Federal Regulations (14 CFR) part 27 (Airworthiness Standards: Normal Category Rotorcraft) and part 29 (Airworthiness Standards: Transport Category Rotorcraft) related to the certification of rotorcraft. The proposed changes are necessary due to the extensive application of advancing technologies to rotorcraft. Existing airworthiness standards are inadequate because they do not address increasing design complexity. To address these advances, the FAA currently issues recurring special conditions, equivalent level of safety findings (ELOS), and means of compliance (MOC) issue papers. This proposed rule would address these problem areas by updating those standards that cause unnecessary burdens in cost and time to both the FAA and the rotorcraft industry. Compliance with these proposed regulatory changes would continue to be shown by the same testing, analysis, and inspections as in the current certification process and there would be a reduced burden through clarification of the safety requirements for the installed systems.

The FAA invites interested persons to participate in this rulemaking by submitting written comments, data, or views. The agency also invites comments relating to the economic, environmental, energy, or federalism impacts that might result from adopting the proposals in this document. The most helpful comments reference a specific portion of the proposal, explain the reason for any recommended change, and include supporting data. To ensure the docket does not contain duplicate comments, commenters should send only one copy of written comments, or if comments are filed electronically, commenters should submit only one time.

Comments must be received by the FAA by January 30, 2018.

(Source: Federal Register)

FMI: www.federalregister.gov/documents/2017/11/01/2017-23360/normal-and-transport-category-rotorcraft-certification?utm_campaign=subscription%20mailing%20list&utm_source=federalregister.gov&utm_medium=email

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC