'The Swarm' Is A Multi-Rotor Copter Capable Of Carrying A Person | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Thu, Oct 08, 2015

'The Swarm' Is A Multi-Rotor Copter Capable Of Carrying A Person

Forty-Six Rotors Provide Sufficient Lift For Manned Flight

If this were on a TV show like "Mythbusters" or "What Could Possibly Go Wrong" ... it would come with a the disclaimer "Don't try this at home." But A British man did try it at home ... and has taken the multi-rotor copter concept to the extreme.

YouTube user gasturbine 101, whose first name is apparently Paul based on comments on the YouTube page, has taken 54 electric motors and 18-inch rotors and built an aircraft he can fly.

He dubbed the aircraft "The Swarm."

According to the YouTube video description, the aircraft cost the tinkerer about $9,000 to build, and he says he never intends to fly it more than about head-high.

"54 chosen as this fits the hexagonal close pack layout. 6 more could be added in the center," he writes. "18 in props at 5000 rpm though hazardous, are still much less so than 6, 5 ft ones. Where could you get a low power 5ft prop from weighing less than 1Kg with opposite pitches? The 54 gives good redundancy as mechanical and power electronic systems are the main failure areas. I have had one ESC randomly fail already. Controls could be made fully redundant (9 x KK2.15s) so only the control sticks (and pilot) are single failure points. Redundancy increases the [likelihood] of failure but reduces the consequences."

Just in case one of those props comes off, there is a cockpit canopy protecting his head.

While the aircraft can be seen taking off and landing several times, it apparently is not as maneuverable as the inventor would like. "No one has spotted the biggest flaw! That is the large number of props running at high speed means the net torque reactions are relatively low, so the craft has little yaw authority. So it probably needs a tail rotor for spot turns," he writes.

One commenter recommends that he put floats on the aircraft to make it an amphib. Paul, we salute your ingenuity.

The video has received over 3.5 million views since being posted on August 29th. Go ahead, add another.

(Image from YouTube video)

FMI: Video

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC