Mon, Oct 16, 2017
Company Issues Alert Service Bulletin For 296 Models
The FAA has issued a Special Airworthiness Information Bulletin following Sikorsky's release of an Alert Service Bulletin concerning landing gear dampers on Model 269 helicopters.
According to the FAA, Sikorsky 269C and C-1, 269D and 269D Configuration “A” model rotorcraft incorporate landing gear dampers designed to alleviate ground resonance. However, these dampers, if not maintained with the correct charge pressures, have been attributed to incidents of ground resonance which resulted in major structural damage or total loss of the rotorcraft. Therefore, Sikorsky issued the following ASBs to ensure they must pass a one-time LST. The HMI’s were later revised to include the LST anytime the landing gear damper is serviced or overhauled.
With the above information, supported by the statistical analyses of recent accidents, the FAA recommends the following:
- A one-time landing gear damper LST for the affected 269 models in compliance with the ASBs to improve protection against ground resonance accidents, unless the landing gear damper has been successfully serviced after April 15, 2014, either to the aforementioned ASB, or the updated HMI requirements. Furthermore, whenever a landing gear damper is removed for maintenance, a successful LST as specified in the HMI is recommended.
- Perform the landing gear damper Load/Stroke Inspection requirements for SIKORSKY MODEL 269C per the latest Basic Handbook of Maintenance Instructions, Publication No. CSP-C-2, Appendix C, Section 5.
- Perform the landing gear damper Load/Stroke Inspection requirements for SIKORSKY MODEL 269C-1 per the latest Basic Handbook of Maintenance Instructions, Publication No. CSP-C1-2, Appendix C, Section 5.
- Perform the landing gear damper Load/Stroke Inspection requirements for SIKORSKY MODEL 269D per the latest Basic Handbook of Maintenance Instructions, Publication No. CSP-D-2, Appendix C, Section 5.
- Perform the landing gear damper Load/Stroke Inspection requirements for SIKORSKY MODEL 269D Configuration “A” per the latest Basic Handbook of Maintenance Instructions, Publication No. CSP-D-9, Appendix C, Section 5.
(Source: FAA. Image from file)
More News
Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]
“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]
"We are reaching out to you today on behalf of the Popular Rotorcraft Association because we need your help. We are dangerously close to losing a critical resource that if lost, wi>[...]
UAS Traffic Management (UTM) The unmanned aircraft traffic management ecosystem that will allow multiple low altitude BVLOS operations and which is separate from, but complementary>[...]
Aero Linx: Society of Aviation and Flight Educators (SAFE) SAFE is a member-oriented organization of aviation educators fostering professionalism and excellence in aviation through>[...]