NTSB Concludes News-Copter Collided With Small Drone | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Fri, Jul 10, 2020

NTSB Concludes News-Copter Collided With Small Drone

No Evidence Of The Drone Itself... But If The Shoe Fits...

After an extensive investigation, a proper one we might add, it now appears that there has been one more documented midair between a civil manned aircraft and unmanned drone, albeit (apparently) a small hobby drone.

The helicopter was operating under the provisions of 14 CFR Part 91 as an electronic news gathering flight, under visual flight rules, within Class G airspace. The pilot heard a noise which he first thought might be a bird strike, and made a precautionary landing. Post flight examination led the pilot and operator to believe they collided with a drone.

A search by ground and electronic methods did not locate a drone.

Laboratory examinations indicated that the shape and dimensions of the damage to the horizontal stabilizer were consistent with the configuration and dimensions of many popular small drones. A small mark inside the larger round dent was consistent with the propeller shaft diameter of common small drones.

Infrared examination revealed material transfer of polycarbonate polymer, which is a commonly used construction material of small drones. Although many items which could come in contact with the helicopter as ground FOD, are manufactured of polycarbonate (e.g. safety glasses, light lenses), the shape and configuration of the indentations and scuffs were very consistent with a small drone.

The reported collision occurred in Class G airspace, but higher than the 14 CFR Part 107 regulatory maximum of 400 feet agl for small drones. A provision in Part 107 allows for operations above 400 feet if the drone is within 400 feet laterally of a tall structure. Downtown Los Angeles was approximately ¼ mile away from the collision site, therefore, although the altitude and location are not authorized for drones without a waiver, it is not inconceivable that a drone operator could have been operating near the tall buildings, and deviated or exceeded the lateral requirements.

Although no drone was located, preventing complete certainty, all the available evidence was consistent with a collision with a small UAS.

  • Location: Los Angeles, CA Incident Number: DCA20IA034A
  • Date & Time: 12/04/2019, 1915 PST
  • Registration: N71HD Aircraft: AIRBUS AS 350 B2
  • Aircraft Damage: Minor
  • Defining Event: Midair collision
  • Injuries: None
  • Flight Conducted Under: Part 91: General Aviation - Aerial Observation

Probable Cause: The National Transportation Safety Board determines the probable cause(s) of this incident to be: an inflight collision with a hard object of polycarbonate construction, with size and features consistent with that of a small UAS (drone).

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC