Wed, Jun 18, 2003
3D Systems Corp. announced just yesterday that
Airbus in the United Kingdom purchased an SLA® 7000 system to
produce components for wind tunnel testing at its operations in
Filton, Bristol. The purchase of an SLA 7000 system will be used to
create larger models with tighter tolerances and high quality
surface finish in the wind tunnel.
"My background for the last 5 years has been on the test side
where we are always under pressure to meet deadlines," said Martin
Aston wind tunnel domain manager for Airbus in Filton. "We were
already using 3D Systems technology through a third party service
bureau and were aware of some of the advantages of
stereolithography. If we are able to build models more quickly we
can enter the design cycle later, which gives the aerodynamicist
more time to think before committing to a test. We realized over a
year ago, rather than outsourcing our prototyping and model
production, that we needed to invest in new technology of our own
if we were going to improve our cycle times without lowering our
standards."
"We are currently using the SLA 7000 system for
our Flight Physics which encompasses the aerodynamic groups who
submit new geometries for testing in the tunnel. Typical components
include leading edge and trailing edge configurations, flap tracks,
pylons and nacelles. Having our own SLA system on-site allows us to
react more quickly and more cost effectively to our bottom line,"
continued Aston. "We now try designs we never would have done
before because we have the technology on-site. Effectively we can
think of an idea, put it on the system to build overnight or over a
weekend and test it the next day. If the design doesn't work we
just repeat the process. To do that through a service bureau would
be almost impossible as the typical turnaround time is four
days."
Airbus has started experimenting with models that they would
never have attempted or thought possible previously. Producing
plastic models using the SLA system enables Airbus to cater for all
of the shapes and curves of aircraft components. Geometric form and
dimensional stability has been dramatically improved, which means
the test data is more accurate. By having the technology on-site a
deeper understanding of the process has been invaluable. This
knowledge allows the project coordinator to define and control
specific attributes of the geometry by understanding the
technology. They can then communicate these constraints with the
operator and part quality can be maintained.
"We no longer have the delay of waiting for returns if we need
to build a new iteration, we simply re-run it on the SLA system,"
stated Aston.
More News
Aero Linx: JAARS Nearly 1.5 billion people, using more than 5,500 languages, do not have a full Bible in their first language. Many of these people live in the most remote parts of>[...]
'Airplane Bounced Twice On The Grass Runway, Resulting In The Nose Wheel Separating From The Airplane...' Analysis: The pilot reported, “upon touchdown, the plane jumped back>[...]
"Burt is best known to the public for his historic designs of SpaceShipOne, Voyager, and GlobalFlyer, but for EAA members and aviation aficionados, his unique concepts began more t>[...]
"Polaris Dawn, the first of the program’s three human spaceflight missions, is targeted to launch to orbit no earlier than summer 2024. During the five-day mission, the crew >[...]
There Are SO Many Ways To Get YOUR Aero-News! It’s been a while since we have reminded everyone about all the ways we offer your daily dose of aviation news on-the-go...so he>[...]