Canada's Transportation Safety Board has released
its final report on the September 2, 1998 crash of a Swissair
MD-11, nicknamed "The UN Shuttle" because of that flight's
popularity among members of that world organization.
There were no surprises in the final determination -- the
plane's systems were compromised by an invisible fire, which
quickly incapacitated those systems and some controls -- but the
relief afforded by the release of the report, and the
recommendations contained therein, will have long-lasting
effects.
Even as MD-11s are accelerating toward airplane boneyards,
lessons learned -- in wiring, in circuitry, in composition and
placement of flammable materials -- are being implemented through
the airline industry, and other industries, from architecture to
automotive design.
Here's a synopsis of the causes:
Aircraft certification standards for material flammability were
inadequate...
Metallized polyethylene terephthalate (MPET)–type cover
material on the thermal acoustic insulation blankets used in the
aircraft was flammable...
Once ignited, other types of thermal acoustic insulation cover
materials exhibit flame propagation characteristics similar to
MPET-covered insulation blankets and do not meet the proposed
revised flammability test criteria...
Silicone elastomeric end caps, hook-and-loop fasteners, foams,
adhesives, and thermal acoustic insulation splicing tapes
contributed to the propagation and intensity of the fire.
The type of circuit breakers (CB) used in the aircraft were
similar to those in general aircraft use, and were not capable of
protecting against all types of wire arcing events...
A segment of in-flight entertainment network (IFEN) power
supply unit cable (1-3791) exhibited a region of resolidified
copper on one wire that was caused by an arcing event...
There were no built-in smoke and fire detection and suppression
devices in the area where the fire started and propagated, nor were
they required by regulation...
There was a reliance on sight and smell to detect and
differentiate between odour or smoke from different potential
sources. This reliance resulted in the misidentification of the
initial odour...
There was no integrated in-flight firefighting plan in place
for the accident aircraft, nor was such a plan required by
regulation. Therefore, the aircraft crew did not have procedures or
training directing them to aggressively attempt to locate and
eliminate the source of the smoke...
...The fire-related failure of silicone elastomeric end caps
installed on air conditioning ducts resulted in the addition of a
continuous supply of conditioned air that contributed to the
propagation and intensity of the fire.
The loss of primary flight displays and lack of outside visual
references forced the pilots to be reliant on the standby
instruments for at least some portion of the last minutes of the
flight. In the deteriorating cockpit environment, the positioning
and small size of these instruments would have made it difficult
for the pilots to transition to their use, and to continue to
maintain the proper spatial orientation of the aircraft.
Also: SkyReach Parts Support, Piper Service Ctr, Airliner Near-Miss, Airshow London The Judge overseeing Icon's convoluted Chapter 11 process has approved $9 million in Chapter 11 >[...]
ILS PRM Approach An instrument landing system (ILS) approach conducted to parallel runways whose extended centerlines are separated by less than 4,300 feet and at least 3,000 feet >[...]
Aero Linx: FlyPups FlyPups transports dogs from desperate situations to fosters, no-kill shelters, and fur-ever homes. We deliver trained dogs to veterans for service and companion>[...]
Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]
Also: NBAA on FAA Reauth, DJI AG Drones, HI Insurance Bill Defeated, SPSA Airtankers The Beechcraft Denali continues moving forward towards certification, having received its FAA T>[...]