NTSB Releases Investigative Update On Rejected Takeoff, Runway Excursion | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Thu, Mar 23, 2017

NTSB Releases Investigative Update On Rejected Takeoff, Runway Excursion

Aircraft Came To A Stop About 1,000 Feet Past The Runway Threshold

The NTSB has issued an investigative update for the March 8, 2017, rejected takeoff and runway excursion at Willow Run Airport, Ypsilanti, Michigan.

All 109 passengers and seven crewmembers evacuated Ameristar Air Cargo Inc., flight 9363 via escape slides after the Boeing MD-83 came to rest about 1,000 feet past the end of runway 23L. One passenger sustained a minor injury during the evacuation.

The board said that the update does not provide probable cause for the accident and does not contain analysis of information collected thus far in the NTSB’s ongoing investigation. As such, no conclusions regarding the cause of the incident should be made from this preliminary information.

The following facts are provided as an investigative update:

Parties to the investigation include the Federal Aviation Administration, The Boeing Company and Ameristar Air Cargo, Inc.
Both pilots held airline transport pilot certificates with DC-9-series type ratings (this rating includes the MD-83).
The pilot-in-command, who was the Ameristar chief pilot, was in the right seat and was providing differences training to the captain, who was in the left seat and was the pilot flying the aircraft.
The Ameristar chief pilot had 9,660 total flight hours, with 2,462 hours in DC 9 series airplanes. The captain (flying pilot) had 15,518 total flight hours, with 8,495 hours in DC-9-series airplanes.

Post-accident examination revealed movement of the control column in the cockpit appeared normal; the control columns were free to move, and the elevator control tabs moved as commanded. However, when investigators tried to move the elevator surfaces by hand, the left elevator moved normally, but the right elevator was jammed in a trailing edge-down position (airplane nose down). Upon further inspection, the right elevator geared tab inboard pushrod linkage was found damaged which restricted movement of the right elevator surface but allowed movement of the control tab.

After the damaged components were removed, the elevator could be moved by hand.Examination of the flight data recorder data indicates that during the taxi and take-off roll, the left elevator moved normally, but the right elevator did not move. During takeoff roll, the left elevator began a large airplane nose-up movement (consistent with rotation) at an airspeed of about 152 knots and continued for five seconds to about 166 knots. There was no change in the airplane pitch attitude during this time.

The airplane data then are consistent with the takeoff being rejected. The maximum recorded airspeed was about 173 knots.Review of previous flight data showed normal movement of both the left and right elevator surfaces. The airplane flew to Ypsilanti two days before the accident.The flight and cabin crewmembers indicated in post-accident statements that all slides except for the forward right door deployed correctly. The slide was removed from the airplane and will be examined by investigators at a future date.

No further updates are planned for this investigation. The docket for the investigation will be opened to the public prior to release of the final report.

(Graphic provided with NTSB news release. Aircraft image from YouTube video uploaded by user Mtrain999)

FMI: https://go.usa.gov/xXkXx

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC