Tue, Mar 16, 2010
Problem Arose During Preparations For Fuel Loading
Engineers met at NASA's Kennedy Space Center in Florida Monday
to discuss options following an issue that arose while venting
space shuttle Discovery's aft fuel propellant tanks in preparation
for fuel loading during the weekend.
The Right Reaction Control System, or RRCS, fuel helium tank
pressure unexpectedly decreased in unison with the RRCS fuel
propellant tank. At least one helium isolation valve is leaking or
is remaining in the open position when it is expected to be
closed.
NASA determined that two helium system regulators, a primary and
a secondary, will be tested to verify they are functioning
correctly. The regulators are "downstream" of the isolation valves,
and help to maintain helium pressure to the fuel tank. Knowing
whether the regulators are operating correctly is a key factor for
managers who must decide whether to launch with the errant
condition of the isolation valves. The test is expected to occur
late this week once a ground support equipment test panel has been
calibrated. The helium system will be brought to flight pressure
and engineers monitoring the panel will ascertain whether the
regulators function properly.
Currently, the rotating service structure rotation will be
delayed to no earlier than Tuesday. Managers also are discussing
when to take the STS-131 payload to the launch pad and whether to
continue with its installation. As of now, the payload will go to
the pad Wednesday. Launch still is targeted for April 5.
At NASA's Johnson Space Center in Houston, the STS-131
astronauts will spend downtime with their families during spring
break this week.
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]