Mon, Jun 12, 2006
Boeing Says Isolated Incident Won't Affect Schedule
We suspect structural engineers on Boeing's 787 program are
working overtime on this one, after a required test for FAA
certification was called off due to a possible defect in the
aircraft's composite skin.
Business Week reports a 33-foot prototype section of the 787s
fuselage -- which was to be used as part of an FAA test to certify
the aircraft's manufacturing process -- displayed bubbles in the
composite structure.
Boeing spokeswoman Yvonne Leach said the bubbles were likely
caused by a leak in a pressing tool used to form the aircraft's
fuselage, which allowed gases to seep into the composite
material.
Over time, the bubbles could degrade and weaken the composites,
which are used extensively in the 787's structure.
Despite the glitch, however, Boeing's expected 2008
certification for the Dreamliner is not likely to be affected.
"We know what happened," Mike Bair, vice president and general
manager of the 787 program, told the Seattle Post-Intelligencer.
"We learned some things as a result, which is part of what this
whole process is about. We know what we have to do to support our
certification plan."
Bair also noted the component that showed evidence of bubbling
-- a central barrel section -- was one of nine that make up the
787's fuselage. Those eight other sections (including the complex
nose and tail sections) showed no significant problems.
To make up time lost in the delay, Bair said the company will
produce two identical components and test them concurrently.
More News
Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]
Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]
“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]