Did Fatal CO Run-Up Break The Rules At ELP? | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Wed, Feb 15, 2006

Did Fatal CO Run-Up Break The Rules At ELP?

Officials Won't Comment

Were mechanics on the ground at El Paso International Airport breaking the rules last month, when they conducted engine run-up tests on a Continental Airlines 737?

As Aero-News reported, Donald Gene Buchanan was sucked into right turbofan of a waiting 737 January 16th during a maintenance check. He was killed when the engine spooled up to 70-percent power. Buchanan, a 64-year old A&P from Julie's Aircraft Services, had been checking for a reported oil leak at the time.

The question, however, is whether the run-up -- which was conducted at the gate -- should have been conducted somewhere else. The El Paso Times reports airport rules say run-ups are forbidden in the terminal area -- and are only allowed in the designated run-up area, more than two miles away across the field.

Passengers were boarding the airliner when the pilots advanced the throttles -- causing Buchanan to be pulled into the engine.

Bill Gamble, an air safety investigator from Arlington, TX who is investigating the death for the NTSB, said he is aware of the airport's procedures for run-ups -- but he was not prepared to comment on whether those rules were violated.

"We are still collecting data," Gamble told the Times.

Meanwhile, the owner of Julie's Aircraft Services says his mechanics don't have authorization to order run-ups, or to taxi aircraft to the run-up area.

"The captain is in charge of the airplane. We don't have run-up and taxi authorization from Continental," said Thorleifur Juliusson. "It could be requested to take it (the engine's power) up that high, but then the captain would have to say let's take it (the plane) up to Runway 22," where the run-up apron is located.

Continental wouldn't comment on the fatal accident -- citing the ongoing NTSB investigation as its reason.

El Paso airport Aviation Director Pat Abeln also would not comment on factors involved in the January 16 fatality -- but he did note the airport has run-up areas for a reason, largely due to noise.

"Those are reasonable rules and regulations and we would expect them to be complied with," Abeln said.

FMI: www.continental.com, www.elpasointernationalairport.com

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Airborne 05.06.24: Gone West-Dick Rutan, ICON BK Update, SpaceX EVA Suit

Also: 1800th E-Jet, Uncle Sam Sues For Landing Gear, Embraer Ag Plane, Textron Parts A friend of the family reported that Lt. Col. (Ret.) Richard Glenn Rutan flew west on Friday, M>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC