AD: Saab AB, Support and Services | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Sat, Jun 26, 2021

AD: Saab AB, Support and Services

AD 2021-09-11 Prompted By A Report Indicating That The Lefthand MLG Collapsed After Touchdown

The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model SAAB 2000 airplanes.

This AD was prompted by a report indicating that the lefthand main landing gear (MLG) collapsed after touchdown, causing severe damage to the airplane. This AD requires modifying the MLG hydraulic transfer valve, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective July 29, 2021.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0223, dated October 14, 2020 (EASA AD 2020-0223) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Saab AB, Support and Services Model SAAB 2000 airplanes.

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Saab AB, Support and Services Model SAAB 2000 airplanes. The NPRM published in the Federal Register on February 24, 2021 (86 FR 11184). The NPRM was prompted by a report indicating that the left-hand MLG collapsed after touchdown, causing severe damage to the airplane. The NPRM proposed to require modifying the MLG hydraulic transfer valve, as specified in EASA AD 2020-0223.

The FAA is issuing this AD to address abnormal behavior of the MLG hydraulic transfer valve due to a restriction in hydraulic flow, which could cause the MLG hydraulic transfer valve to not function properly and fail to retract, extend, or lock the MLG, and possibly result in MLG collapse following landing and consequent damage to the airplane and injury to occupants. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC