NTSB Preliminary Report Indicates Helicopter Broke Up In Flight | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.20.24

Airborne-NextGen-05.21.24

Airborne-Unlimited-05.15.24 Airborne-AffordableFlyers-05.16.24

Airborne-Unlimited-05.17.24

Wed, Jun 16, 2010

NTSB Preliminary Report Indicates Helicopter Broke Up In Flight

Main Rotor And Tail Boom Separated From Bell 222U Over Midlothian, TX

The NTSB has issued a preliminary report in an accident involving a Bell 222U helicopter owned and operated by CareFlite of Grand Prairie, TX. The report indicates that the aircraft broke up while on a post-maintenance flight at about 600 feet AGL.

NTSB Identification: CEN10FA291
14 CFR Part 91: General Aviation
Accident occurred Wednesday, June 02, 2010 in Midlothian, TX
Aircraft: BELL 222, registration: N515MK
Injuries: 2 Fatal.

This is preliminary information, subject to change, and may contain errors. Any errors in this report will be corrected when the final report has been completed.

On June 2, 2010 at approximately 1400 central daylight time, a Bell 222U, multi-engine helicopter, N515MK, was destroyed after impacting terrain near Midlothian, Texas. The airline transport rated pilot and the mechanic, who were the only occupants, sustained fatal injuries. The helicopter was owned and operated by CareFlite, Grand Prairie, Texas. Visual meteorological conditions (VMC) prevailed at the time of the accident and a company flight plan had been filed for the Title 14 Code of Federal Regulations Part 91 return to service flight following maintenance that had been performed. The helicopter had departed the Grand Prairie Municipal Airport (GPM) Grand Prairie, Texas at approximately 1352, and had planned to return to GPM airport.


File Photo

The helicopter was in cruise flight at approximately 600 feet above ground level (AGL) when several witnesses saw the tail boom and the main rotor system separate from the helicopter. The fuselage was destroyed in an immediate post-impact fire. The main rotor mast separated just below the head. The main rotor system including the hub and blade assembly, pitch change links, and walking beam assembly remained connected to the swash plate assembly and impacted terrain approximately 200 feet northeast of the main wreckage. The entire tail boom assembly separated just aft of the fuselage and impacted terrain approximately 400 feet northeast of the main wreckage.

The wreckage was removed to a secure storage facility for continued investigation.

FMI: www.ntsb.gov

Advertisement

More News

Samson Sky Hits the Wind Tunnel

Improvements Stack as Brand Readies for Mass Production Samson Sky updated followers on its flying car progress, describing some of the travails of the wind tunnel as they get clos>[...]

ANN's Daily Aero-Term (05.22.24): LAHSO

LAHSO An acronym for “Land and Hold Short Operation.” These operations include landing and holding short of an intersecting runway, a taxiway, a predetermined point, or>[...]

Aero-FAQ: Dave Juwel's Aviation Marketing Stories -- ITBOA BNITBOB

Dave Juwel's Aviation Marketing Stories ITBOA BNITBOB ... what does that mean? It's not gibberish, it's a lengthy acronym for "In The Business Of Aviation ... But Not In The Busine>[...]

ANN's Daily Aero-Linx (05.19.24)

Aero Linx: Space Medicine Association (SMA) The Space Medicine Branch was founded in 1951 as the first constituent organization of the Aerospace Medical Association (AsMA). In 2006>[...]

ANN's Daily Aero-Term (05.19.24): Back-Taxi

Back-Taxi A term used by air traffic controllers to taxi an aircraft on the runway opposite to the traffic flow. The aircraft may be instructed to back-taxi to the beginning of the>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC