Thu, May 05, 2005
Dassault's Falcon 7X
has flown for the first time, Thursday afternoon, at Dassault
Aviation's facility in Bordeaux Merignac, France. Falcon 7X s/n 1
took to the skies for the first time with Test pilots Yves "Bill"
Kerherve and Philippe Deleume at the controls. The airplane lifted
off at 8:45 am EST and flew for an hour and thirty six minutes.
"The first flight of the Falcon 7X was a success," said Kerherve
who is the Senior Test Pilot for Dassault Aviation. "The aircraft
performed beautifully and we're on track to start the rigorous 15
months of flight testing that lay ahead."
After departing Bordeaux's International Airport, the aircraft
climbed directly to 10,000 feet where various systems checks
including hydraulic, fuel, air data systems and landing gear
extraction/retraction tests were performed. The airplane then
climbed to 25,000 feet where acceleration/deceleration tests were
conducted as well as basic autopilot and auto-throttle
operations.
The Falcon 7X carried the registration numbers of F-WFBW to
remind those watching that this is the first business jet designed
with a Fly By Wire flight control system. The test aircraft was
fully equipped with instrumentation to allow the measurement of
more than 3000 digital and 1000 analog parameters. It touched down
at the Bordeaux airport at 10:21 a.m. EST.
"Today the pioneering spirit of Marcel Dassault lives on," said
Charles Edelstenne, Chairman and CEO of Dassault Aviation. "That
spirit is embodied in every one of our engineers, partners,
customers and flight test team who made this spectacular event
possible. This is surely a day we will all remember for years to
come."
During the next test flight, the airplane will be relocated to
the Dassault Test Center in Istres, France. The second test
aircraft will arrive in Istres in the 2rd Quarter and the third
test aircraft will arrive this summer. Falcon 7X s/n 3 will be
outfitted with a full interior and will be used for long range and
endurance tests as well as interior sound level validation.
Approximately 1,200 flight test hours have been allotted before
final certification by the FAA and EASA before the end of 2006.
Dassault says that it has 50 firm orders for the new biz-jet.
A static and fatigue test airframe has been undergoing tests at
CEAT in Toulouse since March 2005.
More News
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
Also: 1800th E-Jet, Uncle Sam Sues For Landing Gear, Embraer Ag Plane, Textron Parts A friend of the family reported that Lt. Col. (Ret.) Richard Glenn Rutan flew west on Friday, M>[...]
Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]