Thu, Dec 23, 2021
AD 2021-24-21 Requires Revising The AFM To Incorporate New And Revised Airspeed Limitations And Procedures
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model EMB-500 and EMB-505 airplanes.
This AD was prompted by a report that the operational envelope does not contain airspeed limitations and procedures for operating the airplane at static air temperatures below -54 °C. This AD requires revising the airplane flight manual (AFM) to incorporate new and revised airspeed limitations and procedures. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective January 25, 2022.
Supplementary Information: The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Embraer S.A. Model EMB-500 and EMB-505 airplanes with certain engines installed. The NPRM published in the Federal Register on August 2, 2021 (86 FR 41410). The NPRM was prompted by MCAI originated by the Agência Nacional de Aviação Civil (ANAC), which is the aviation authority for Brazil. ANAC issued AD 2020-05-03, effective June 1, 2020 (ANAC AD 2020-05-03) (also referred to after this as “the MCAI”), to correct an unsafe condition on Embraer S.A. Model EMB-500 and EMB-505 airplanes with certain engines installed. Although the affected airplanes were designed for operation at temperatures below -54 °C, the operational envelope in the AFM does not contain the necessary limitations and procedures to operate safely in these colder temperatures.
The MCAI states that operation of the affected airplanes at static air temperatures below -54 °C without these limitations could cause several systems and components to operate inadequately, resulting in multiple systems failures.
Accordingly, the MCAI requires updating the AFM to incorporate a modified operational envelope that establishes restrictions and minimum airspeed required for each static temperature range. In the NPRM, the FAA proposed to require revising the AFM to incorporate the new and revised airspeed limitations and procedures specified in the manufacturer's service information. The FAA is issuing this AD to prevent inadequate operation below the allowable temperature, which could result in multiple systems failures and compromise safe flight of the airplane.
You may examine the MCAI in the AD docket at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1077.
More News
Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]
Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]
“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]
How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]
Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]