NTSB Prelim: Cessna 170 | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Mon, Dec 07, 2020

NTSB Prelim: Cessna 170

The Airplane Went To The Right Which He Could Not Correct

Location: Pottstown, PA Accident Number: ERA20LA338
Date & Time: September 22, 2020, 12:18 Local Registration: N2772D
Aircraft: Cessna 170 Injuries: 2 None
Flight Conducted Under: Part 91: General aviation - Personal

On September 22, 2020, about 1218 eastern daylight time, a Cessna 170B, N2772D, was substantially damaged when it was involved in an accident near Pottstown, Pennsylvania. The pilot-in-command (PIC) and pilot-rated passenger were not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

According to Federal Aviation Administration (FAA) ADS-B data, after takeoff from Heritage Field Airport (PTW) the flight flew around locally then returned and entered the downwind leg of the airport traffic pattern for runway 28. The flight turned onto the base and final legs of the airport traffic pattern for runway 28. The PIC stated to a FAA inspector that during the approach the winds were reported to be 8 knots gusting to 15 knots from 310°. He reported to NTSB that the flight encountered light turbulence and a little bit of windshear on short final with a slight gain/loss of indicated airspeed, though he was not worried. The flight ballooned about 8 to 10 ft, to which he added a little power while flying above the runway. With a wind from the right, the main landing gears contacted the runway and at that moment the wind shifted from a quartering headwind to a quartering tailwind. With left rudder and brake applied, the airplane went to the right which he could not correct. The airplane ground looped and spun to the right and exited the runway. When it did so he pulled the mixture control and turned the fuel selector and master switch off. The airplane came to rest in an easterly heading which was opposite the landing direction. He further stated that he was comfortable with the reported winds and he did not believe attempting a go-around would have been feasible or safe.

FMI: www.ntsb.gov

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC