Fri, Jun 12, 2009
There's something about a Cub... a something that has remained
alluring over the course of the better part of a century. But then
again, there are Cubs and there are SUPER Cubs... hence our
fascination with the CubCrafters Super SportCub.
CubCrafters tells ANN that the SUPER SportCub shares many
airframe parts with the Sport Cub S2 and the Carbon Cub Kit. By
eliminating virtually all airframe components that don’t
carry flight or landing loads, this modern design is simpler,
lighter and stronger than the Piper Super Cub designed in 1949. 60
years of technology has enabled CubCrafters engineers to maximize
material design and incorporate modern manufacturing processes that
maximize strength and minimize weight.
With a 180 HP engine, the airframe design has been tested to
well beyond the requirements for Light Sport Aircraft. Flight and
landing loads were increased by 40% to 5.65Gs for the design loads,
and to 8.5Gs for ultimate tests. Piper Super Cubs were tested to
3.8Gs as required by the Standard Category. Struts, spars, landing
gear, control surfaces, engine mount, and the fuselage were all
tested by CubCrafters with lead weights and hydraulic pressure, not
just analyzed by computer as allowed under LSA rules. This modern
offspring of the Cub lineage is comprised of 50% fewer parts and is
250 pounds lighter than a similarly equipped Super Cub. With a
power to weight ratio of 7.33 pounds per horsepower, the SUPER
SportCub hauls the mail...
The SUPER SportCub is available in both one and two place
configurations, and can be certified as either an S-LSA aircraft,
or as an Experimental LSA aircraft if the customer so desires.
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]