AceAir SA Introduces Aeriks 200 Composite Canard Kit to US Market | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Fri, Aug 01, 2003

AceAir SA Introduces Aeriks 200 Composite Canard Kit to US Market

Classic Italian styling and Swiss engineering produces beautiful tandem 2-seater

By ANN Correspondent Juan Jimenez

At first glance, there is only one thought that comes to mind: "Honey, I shrunk the Avanti." AceAir SA, based out of Manno, on the Italian side of Switzerland, has brought their first creation to Oshkosh, the Aeriks 200, a very stylish composite canard kit airplane with interior features reminiscent of high-end automotive designs than the typical canard homebuilt.

Fresh off its first flight on May 29, 2002 at the hands of test pilot Walter Spychiger, this aircraft is equipped with 105 horsepower Diamond Engines rotary engine (previously known as Midwest Rotary Engines), driving a three-blade MT Propellers composite three-blade prop with a 2024-T3 driveshaft. The engine is fully embedded in the rear section of the aircraft, and is cooled by three NACA scoops, two on the sides below the wing roots and one in front of the vertical stabilizer.

The aircraft is designed for a 200 kt VNE, 155 kts maximum speed at Sea Level, and a maximum cruising speed of 140 kts at 8,000 MSL. Clean stall is 65 kts and full flaps drops that number to 54 kts. With a fuel tank capacity of 29 gals, endurance is estimated at 5 hours, for a zero-wind range of approximately 700 nm.

According to AceAir, the design process of the aircraft was as high tech as its looks - CAD/CAM tools were employed to lay out the design, and computational fluid dynamics (CFD) and finite-element structural analysis (FEM/FEA) studies were performed to work out as many of the issues that could be identified with CATIA computer workstations. All the molds for the aircraft components were produced with CNC hardware.

During OSH, the company is offering the first three airframe kits for $50,000. This does not include an engine, propeller, avionics or paint.

FMI: www.aeriks.com

Advertisement

More News

Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative

Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]

Diamond's Electric DA40 Finds Fans at Dübendorf

A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]

ANN's Daily Aero-Term (04.23.24): Line Up And Wait (LUAW)

Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]

NTSB Final Report: Extra Flugzeugbau GMBH EA300/L

Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]

Classic Aero-TV: 'Never Give Up' - Advice From Two of FedEx's Female Captains

From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC