Dreamliner Passes Fuselage Barrel Tests | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Fri, Feb 29, 2008

Dreamliner Passes Fuselage Barrel Tests

Big Hurdle Cleared For Composite Airliner

For all the reports of late about all that's gone wrong with Boeing's 787 Dreamliner -- namely, mounting delivery delays stemming from a shortage of fasteners, and various other supplier woes -- Boeing would like everyone to note some things are going right, too.

On Thursday, the American planemaker announced the 787's composite technology, design and construction was proven to be up to the rigors of regular scheduled airline service, during a series of testing scenarios conducted beginning in late 2007 and concluding this week. The tests were performed on a composite fuselage test section, and are part of Boeing's certification efforts for the 787.

"The tests were very successful -- they couldn't have gone any better," said Kevin Davis, 787 fuselage authorized representative and leader of the testing.

Boeing says its engineers proved the composite barrel design through a series of incremental tests that first took the barrel to limit load, a test condition that simulates the most extreme conditions expected to be experienced in the life of the airplane.

Next, the test article was taken to 150 percent of limit load -- a condition called "ultimate load," the level required for certification. Finally, the team pushed the composite section past ultimate load well beyond ultimate load to a destruct-condition maneuver beyond two and a half times the force of gravity.

Testers observed audible indications of damage as the test progressed, but the piece did not reach the level of destruction that had been anticipated. Boeing engineers now are performing an extensive inspection of the barrel and analysis of test results.

The robust test program is key to clearing the Dreamliner for first flight. Some testing on the composite barrel section will continue, Boeing says, but it is at the company's discretion for additional learning, and not an FAA requirement.

Additional static testing is required, and will be conducted, on a full airplane structure prior to first flight.

FMI: www.boeing.com

Advertisement

More News

Aero-News: Quote of the Day (05.09.24)

"Fly-by-wire flight, coupled with additional capability that are being integrated into ALFA, provide a great foundation for Bell to expand on its autonomous capabilities. This airc>[...]

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Linx (05.09.24)

Aero Linx: B-21 Raider The B-21 Raider will be a dual-capable penetrating strike stealth bomber capable of delivering both conventional and nuclear munitions. The B-21 will form th>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC