Wed, Oct 11, 2006
Applicability:
- Model SR20 aircraft, serial numbers 1005 through 1600.
- Model SR22 aircraft, serial numbers 0002 through 1727.
Requirement:
- For Model SR20 aircraft, serial numbers 1005 through 1600, and
Model SR22 aircraft, serial numbers 0002 through 1727: Accomplish
the requirements of Cirrus Design Corporation Alert Service
Bulletin SB 2X-25-17, Revised 20 January 2006.
- For Model SR20 aircraft, serial numbers 1005 through 1455, and
Model SR22 aircraft, serial numbers 0002 through 1044: Accomplish
the requirements of Cirrus Design Corporation Alert Service
Bulletin SB 2X-25-06 R4, Revised 5 May 2005.
Note 1: FAA AD 2006-19-10 Amdt 39-14767 refers.
Note 2: Requirement 2 remains unchanged from the original issue
of this Airworthiness Directive and need not be reapplied if
previously accomplished.
Compliance:
Requirement 1: Within 50 hours time in service or 180 days after
23 November 2006, whichever occurs first; unless already
accomplished.
Requirement 2: Within 50 hours time in service or 180 days after
13 October 2005, whichever occurs first; unless already
accomplished.
Note: The compliance date for Requirement 2
of this Airworthiness Directive remains unchanged by this
amendment. This Amendment becomes effective on 24 October
2006.
Background:
The FAA received information from the manufacturer that the crew
seats, under emergency landing dynamic loads, may fold forward at
less than the 26g required by the regulations. The actions required
by this Directive are intended to prevent the crew seats from
folding forward during emergency landing dynamic loads with
consequent occupant injury.
This amendment has been raised because the manufacturer has
developed new crew seat break-over pins to replace the old crew
seat break-over bolts. Consequently, this AD retains the action
from the original issue of replacing the crew seat recline locks on
both seats and adds the action of replacing the crew seat
break-over bolts with the new crew seat break-over pins on both
seats.
This amendment was raised to apply FAA AD 2006-19-10 which
superseded AD 2005-17-19.
More News
Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]
A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]
Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]
Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]
From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]