NASA Close To Determining Strategy For Launch Pad Repairs | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Wed, Jun 18, 2008

NASA Close To Determining Strategy For Launch Pad Repairs

39-A Damaged During Discovery Launch

Officials with NASA allowed journalists to take a look at damage to Pad 39-A at Kennedy Space Center on Monday, two weeks after the launch of space shuttle Discovery caused some 5,300 heat-resistant bricks to break off from a flame-retardant blast wall.

The Associated Press reports the scene resembled "the aftermath of a volcanic eruption," with brick fragments still scattered around the site. Cleanup efforts have reportedly stalled due to traces of asbestos found in the bricks.

The "flame trench" was installed when Pad 39-A was constructed by the US Army Corps of Engineers in the 1960s, and was used for the Apollo moon missions. NASA said it appears some of the bricks weren't applied properly at that time, allowing gaps between the bricks and the adhesive used to form and widen over the years.

Before Discovery's June 2 launch, the worse damage to the pad occurred during the doomed January 28, 1986 launch of the shuttle Challenger... when about 800 bricks were lost. 

Despite the damage, NASA is optimistic the pad will be repaired in time for the early October launch of the space shuttle Atlantis. Senior managers will meet June 26 to discuss options, with the most likely scenario involving the installation of a steel mesh cover over the roughly 75-foot-by-20-foot area where the bricks separated. A heat-resistant coating would then be applied over the mesh.

That repair option is quicker than forming and installing new bricks, said NASA's lead engineer on the project, Perry Becker. It will take months for new bricks to be delivered.  

NASA is also inspecting the adjacent pad 39-B, so determine whether its flame trench has similar flaws.

FMI: www.nasa.gov

Advertisement

More News

Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative

Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]

Diamond's Electric DA40 Finds Fans at Dübendorf

A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]

ANN's Daily Aero-Term (04.23.24): Line Up And Wait (LUAW)

Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]

NTSB Final Report: Extra Flugzeugbau GMBH EA300/L

Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]

Classic Aero-TV: 'Never Give Up' - Advice From Two of FedEx's Female Captains

From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC