Wed, Jul 31, 2013
Formation Flight Elevates First Public Debut of FAA-Conforming HondaJet
Two HondaJets made their first public debut Tuesday at EAA AirVenture Oshkosh 2013. The FAA-conforming HondaJets, one red and one blue, concluded the day with another first: a flight demonstration that included a picturesque formation flyby. The aerial salute served as a tribute to EAA AirVenture Oshkosh and the more than 500,000 attendees who gather annually to celebrate aviation.
“EAA AirVenture Oshkosh has special significance for me. This event is where I introduced the proof-of-concept HondaJet to the world for the very first time. It was truly the beginning of Honda’s exciting venture into aviation,” said Honda Aircraft President and CEO Michimasa Fujino. “I am very excited that EAA AirVenture Oshkosh has once again provided the setting for the first public appearance and demonstration flight of not one, but two FAA-conforming HondaJets.”
“EAA AirVenture is an annual celebration of both the past and future of flight,” said Jack J. Pelton, Chairman of the Board for the Experimental Aircraft Association. “We are watching Honda’s pioneering efforts with the HondaJet with great interest and enthusiasm. We welcome the aircraft to Oshkosh as Honda shares it with the world’s flying community.”
The two light jets at EAA AirVenture Oshkosh 2013 are Honda Aircraft Company’s third and fifth FAA-conforming HondaJets. Conforming aircraft meet the final specifications of a production HondaJet. Since 2010, Honda Aircraft has developed and produced six FAA-conforming HondaJets: four flight test and two structural test aircraft. These aircraft are used for flight testing and ground structural testing to meet FAA certification requirements.
The third FAA-conforming HondaJet joined the program in November 2011 and is being used for mechanical system testing. This testing has included the brake control system, nosewheel steering, and flight controls. This aircraft was also used for hot weather testing conducted in Yuma, Ariz., and traveled to the NASA Wallops Flight Facility in Virginia for “wet runway” water ingestion testing to examine the effects of water spray.
The fifth conforming HondaJet joined the test program in May 2013 and is being used for cabin system testing, interior testing, and options testing. It will also be used for FAA function and reliability (F&R) testing. It is the first HondaJet to be equipped with a production interior and is anchoring the final leg of the flight test program.
Honda Aircraft Company is targeting the end of 2014 for FAA certification of the HondaJet.
(Images from file)
More News
Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]
A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]
Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]
Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]
From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]
Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative
See All