Wed, Nov 23, 2005
First Flight Of GP7200 Scheduled For '06
The Engine Alliance --
an equal partnership between General Electric and Pratt &
Whitney, and whose GP7200 engine is to power over half the
confirmed customer-ordered A380s -- has completed all the required
tests for certification of the powerplant by the US Federal
Aviation Administration. The completion of the tests, with expected
certification by the end of the year, clears the way for first
flight on the A380 in 2006.
"The GP7200 has been put through as tough a development and
certification program as any engine has undergone, meeting both new
FAA requirements and Airbus requirements for maturity at entry into
service," said Bruce Hughes, president of the EA.
"This engine, even though it will fly on the four-engine A380,
meets all the demanding requirements for extended range operations
on a twin-engine airliner," continued Hughes. "This is a rock-solid
engine that will be a great performer for our customers."
According to a company release, the GP7200 ran at more than
94,000 pounds of thrust during the testing program -- significantly
higher than initial service requirements of 70,000 pounds of
thrust. So far, the GP7200 has accumulated nearly 3000 hours and
7000 cycles of testing (a cycle is the equivalent of one takeoff
and landing).
The Engine Alliance
delivered the first four GP7200 flight-test engines to Airbus in
September. All GP7200 engines that have been through production
- acceptance testing to date have demonstrated performance
levels at or better than the Airbus fuel burn specification.
The GP7200 will also allow the superjumbo to meet Stage 4 noise
regulations, as well as QC2 noise rules, according to the
company.
More News
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]
“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]
Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]