AD: Airbus SAS Airplanes | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Fri, Jan 15, 2021

AD: Airbus SAS Airplanes

AD 2021-02-05 Requires Re-Torqueing The Attachment Nuts Of Each Affected Part

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A330-200, -200 Freighter, -300, -800, and -900 series airplanes; Model A340-200 and -300 series airplanes; and Model A340-541 and A340-642 airplanes.

This AD was prompted by a report that an erroneous torque value for the attachment nuts to install a pitot probe was included in the affected Aircraft Maintenance Manual (AMM) task. This AD requires re-torqueing the attachment nuts of each affected part. In addition, this AD prohibits the use of the affected AMM task, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective January 29, 2021.

Supplementary Information: The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0279, dated December 14, 2020 (EASA AD 2020-0279) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Model A330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A330-743L, A330-841, A330-941, A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-542, A340-642, and A340-643 airplanes. Model A330-743L, A340-542, and A340-643 airplanes are not certificated by the FAA and are not included on the U.S. type certificate data sheet; this AD therefore does not include those airplanes in the applicability.

This AD was prompted by a report that an erroneous torque value for the attachment nuts to install a pitot probe was included in the affected AMM task. The FAA is issuing this AD to address the erroneous torque value. If not addressed it could lead to erroneous total pressure measurement being relayed to navigation systems, possibly resulting in reduced control of the airplane. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

Aero-News: Quote of the Day (05.09.24)

"Fly-by-wire flight, coupled with additional capability that are being integrated into ALFA, provide a great foundation for Bell to expand on its autonomous capabilities. This airc>[...]

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Linx (05.09.24)

Aero Linx: B-21 Raider The B-21 Raider will be a dual-capable penetrating strike stealth bomber capable of delivering both conventional and nuclear munitions. The B-21 will form th>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC