AD: Yaborã Industria Aeronáutica S.A. | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Wed, Apr 07, 2021

AD: Yaborã Industria Aeronáutica S.A.

AD 2021-07-14 Prompted By A Report Involving Disconnection Of A Side Arm Strut From The Right MLG

The FAA is adopting a new airworthiness directive (AD) for all Yaborã Industria Aeronáutica S.A. Model EMB-135 and EMB-145 airplanes.

This AD was prompted by a report involving disconnection of a side arm strut from the right main landing gear (MLG); a subsequent investigation found that the side arm strut lower bearing was installed inverted on the airplane. This AD Yaborã Industria Aeronáutica S.A.to verify certain conditions and doing all applicable on-condition actions, as specified in an Agência Nacional de Aviação Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD becomes effective April 20, 2021.

Supplementary Information: The ANAC, which is the aviation authority for Brazil, has issued ANAC AD 2021-02-02, effective February 26, 2021; corrected February 26, 2021 (ANAC AD 2021-02-02) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI); to correct an unsafe condition for all Yaborã Industria Aeronáutica S.A. Model EMB-135 and EMB-145 airplanes. Model EMB-145EU, -145LU, and -145MK airplanes (which are included in the MCAI applicability) are not certificated by the FAA and are not included on the U.S. type certificate data sheet; this AD therefore does not include those airplanes in the applicability.

This AD was prompted by a report involving disconnection of a side arm strut from the right MLG; a subsequent investigation found that the side arm strut lower bearing was installed inverted on the airplane. Further inspections found more instances of inverted installations on other airplanes as well as other improper installations (e.g., damaged or missing sealant, or grease fittings incorrectly installed). The FAA is issuing this AD to address disconnection of the MLG side arm strut, which could prevent the MLG from being locked in the down position and possibly lead to loss of control of the airplane during take-off and landing. See the MCAI for additional background information.

FMI: www.regulations.gov

Advertisement

More News

ANN's Daily Aero-Linx (05.02.24)

Aero Linx: Model Aeronautical Association of Australia MAAA clubs are about fun flying, camaraderie and community. For over 75 years, the MAAA has been Australia’s largest fl>[...]

ANN's Daily Aero-Term (05.02.24): Touchdown Zone Lighting

Touchdown Zone Lighting Two rows of transverse light bars located symmetrically about the runway centerline normally at 100 foot intervals. The basic system extends 3,000 feet alon>[...]

Aero-News: Quote of the Day (05.02.24)

“Discovery and innovation are central to our mission at Virgin Galactic. We’re excited to build on our successful record of facilitating scientific experiments in subor>[...]

ANN FAQ: Contributing To Aero-TV

How To Get A Story On Aero-TV News/Feature Programming How do I submit a story idea or lead to Aero-TV? If you would like to submit a story idea or lead, please contact Jim Campbel>[...]

NTSB Final Report: Cirrus Design Corp SR20

Student Pilot Reported That During Rotation, “All Of A Sudden The Back Of The Plane Kicked To The Right..." Analysis: The student pilot reported that during rotation, “>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC