AD 2020-19-13 Requires A Check To Identify The Manufacturer And Part Number Of The Portable Oxygen Bottle Installation
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes.
This AD was prompted by a report that fast and easy access to the portable oxygen bottle may be prevented by the portable oxygen bottle installation's upper bracket latch assembly catching on the pressure gauge tube or on the pressure gauge bezel of the portable oxygen bottle. This AD requires a check to identify the manufacturer and part number of the portable oxygen bottle installation, and, if necessary, modification of the portable oxygen bottle installation. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective November 3, 2020.
Supplementary Information: Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian AD CF-2019-26, dated July 9, 2019 (also referred to as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Bombardier, Inc., Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A, 601-3R, and 604 Variants) airplanes. The NPRM published in the Federal Register on March 23, 2020 (85 FR 16284). The NPRM was prompted by a report that fast and easy access to the portable oxygen bottle may be prevented by the portable oxygen bottle installation's upper bracket latch assembly catching on the pressure gauge tube or on the pressure gauge bezel of the portable oxygen bottle. The NPRM proposed to require a check to identify the manufacturer and part number of the portable oxygen bottle installation, and, if necessary, modification of the portable oxygen bottle installation. The FAA is issuing this AD to address the portable oxygen bottle installation's upper bracket latch assembly catching on the pressure gauge tube or on the pressure gauge bezel of the portable oxygen bottle, which,
if not detected and corrected, could prevent fast and easy access to the portable oxygen bottle in an emergency situation.