TCM Issues Voluntary Recall On Cylinders | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.29.24

Airborne-Unlimited-04.23.24

Airborne-Unlimited-04.24.24 Airborne-FltTraining-04.25.24

Airborne-Unlimited-04.26.24

Thu, Feb 12, 2009

TCM Issues Voluntary Recall On Cylinders

Approx. 9,600 Cylinders Made Since 11/2007 Affected

Teledyne Continental Motors announced Thursday a voluntary recall on certain piston cylinders produced and shipped since November 2007, after owners reported cylinder head cracking found during regular maintenance inspections.

The recall affects cylinders for a number of engine types, including IO-520, TSIO-520, IO-550, and O-470 and IO-470 motors. These engines are found in aircraft including the Bellanca Super Viking; Beech Bonanzas, Barons and Debonairs; Cessna 180, 185, 188, 205, 206, 207, 210, 310, 402 and 414; and Aero Commander 200 and 500 series aircraft. Meyers 200 and certain Navion owners may also be affected, as shown on the chart above.

All 36 cylinders found with this defect were on high-time engines, with over 400 hours of use in the past 15 months. TCM estimates approximately 9,600 cylinders -- sold in both new and rebuilt engines, as well as on the aftermarket as part of top-end overhaul kits -- are subject to the recall announcement.

None of the cylinder cracks led to inflight problems, TCM spokesman Mac Little said. The defect was caused by a specific casting tool used by a vendor to TCM, that cast slightly deeper-than-spec vent castings in the cylinder heads.

A mandatory service bulletin has been issued to address the defect. Little stressed all needed repairs will fall under TCM's warranty coverage, with parts-cost coverage extended for higher-time owners. In other words, affected customers will not need to pay for parts or labor for any of the repairs.

TCM has extended its customer care hotline hours, to handle the expected volume of calls. The company plans to give owners of higher-time cylinders priority for repairs, and Little stressed pilots may still continue flying their affected aircraft under the parameters of the MSB.

The company has talked with the FAA about the possibility of an Airworthiness Directive, though for the moment TCM believes all affected cylinders can be pulled from the market within the next 12 months under the voluntary recall.

Little said the recall represents a roughly $18 million hit for the company. He would not comment when asked whether TCM intended to go after the vendor for that bill.

FMI: www.tcmlink.com/cylinders

Advertisement

More News

ANN's Daily Aero-Term (04.28.24): Airport Marking Aids

Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]

Aero-News: Quote of the Day (04.28.24)

"It is extremely difficult, if not impossible, for manned aircraft to see a drone while conducting crop-enhancing and other aerial applications at low altitudes and high speeds. We>[...]

ANN's Daily Aero-Linx (04.28.24)

Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]

Aero-News: Quote of the Day (04.29.24)

“The T-54A benefits from an active Beechcraft King Air assembly line in Wichita, Kansas, where all required METS avionics and interior modifications are installed on the line>[...]

ANN's Daily Aero-Linx (04.29.24)

Aero Linx: Aerostar Owners Association The Association offers the Aerostar Owner a unique opportunity to tap an invaluable source of information concerning the care and feeding of >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC