NTSB Releases Preliminary Report From Michigan Fatal Accident | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-05.07.24

Airborne-Unlimited-05.08.24 Airborne-FlightTraining-05.09.24

Airborne-Unlimited-05.10.24

Tue, Sep 03, 2019

NTSB Releases Preliminary Report From Michigan Fatal Accident

Aero Commander Was Being Tested Following Maintenance

The NTSB has released a preliminary report from an accident which occurred August 20 that resulted in the fatal injury of two people on board the aircraft.

According to the report, at about 11:18 EDT, an Aero Commander (Meyers) 200D airplane, N200HS, impacted terrain shortly after departing the Livingston County Spencer J. Hardy Airport (OZW), Howell, Michigan. The pilot and pilot rated passenger received fatal injuries and the airplane was substantially damaged. The airplane was registered to Southern Aircraft Consultancy, Inc, Trustee, Norfolk, United Kingdom, and operated by a private individual. VFR conditions prevailed, and no flight plan was filed for the  maintenance test flight.

According to initial reports, the airplane had recently undergone maintenance, including the installation of a new field overhauled engine and a 3-bladed propeller. The purpose of the flight was for a maintenance test flight for the airplane. The pilot-rated passenger, seated in the right seat, was also a mechanic who had performed the recent work on the airplane. The pilot, seated in the left seat, owned a similar airplane make and model.

The airplane was flown earlier in the day. The airplane was then fueled with 34.4 gallons of fuel. It is unknown if any adjustments or maintenance items were accomplished before the second flight.

Witnesses reported that the airplane departed runway 13 at OZW; they added that when the airplane was about 200 to 300 ft in the air, the airplane appeared to stop its climb and was silent. One witness reported that it looked like the airplane tried to turn back to the runway, before entering a rapid descent.

The airplane impacted terrain and came to rest about 600 ft beyond the departure end of the runway. The responding Federal Aviation Administration inspector, the NTSB Investigator-in-Charge, and a technical representative from the engine manufacturer examined the airplane wreckage on site. The examination found the engine air filter element was displaced and in the engine intake tube.

(Images provided with NTSB preliminary report)

FMI: Report

Advertisement

More News

ANN's Daily Aero-Term (05.10.24): Takeoff Roll

Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]

Aero-News: Quote of the Day (05.10.24)

“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]

Airborne 05.06.24: Gone West-Dick Rutan, ICON BK Update, SpaceX EVA Suit

Also: 1800th E-Jet, Uncle Sam Sues For Landing Gear, Embraer Ag Plane, Textron Parts A friend of the family reported that Lt. Col. (Ret.) Richard Glenn Rutan flew west on Friday, M>[...]

Airborne 05.03.24: Advanced Powerplant Solutions, PRA Runway Woes, Drone Racing

Also: Virgin Galactic, B-29 Doc to Allentown, Erickson Fire-Fighters Bought, FAA Reauthorization After dealing with a big letdown after the unexpected decision by Skyreach to disco>[...]

Aero-News: Quote of the Day (05.11.24)

"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC