Mars Rover Stuck In Sand Dune | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-04.22.24

Airborne-Unlimited-04.16.24

Airborne-FlightTraining-04.17.24 Airborne-AffordableFlyers-04.18.24

Airborne-Unlimited-04.19.24

Join Us At 0900ET, Friday, 4/10, for the LIVE Morning Brief.
Watch It LIVE at
www.airborne-live.net

Mon, May 09, 2005

Mars Rover Stuck In Sand Dune

Controllers Testing Ways To Get Out

The Opportunity Rover bogged down in a 12-inch tall sand dune recently, leaving controllers with a challenge. The four corner wheels of the rover are about half buried into the dune, but the rover is otherwise in good condition.
 
"We choose to proceed cautiously, so we don't expect to begin actually driving out of the dune before next week, possibly later," said Jim Erickson, rover project manager at JPL in a statement. "Both Opportunity and Spirit have already provided many more months of scientific exploration than anyone expected. By taking good care of them, we hope to keep them exploring for more months to come. Tests so far have sustained our optimism about Opportunity's ability to drive out of this dune, but we have more testing ahead to understand how robust that capability is."

Opportunity had driven about 131 feet of a planned 295-foot drive when the wheels began slipping. The rover was driving backwards when it began to dig itself into the small dune. Eventually, the rover sensed that something was wrong and it stopped trying to move. It is on the ridge of a small ripple of soft sand. (NASA Mosaic Image below)

"We've climbed over dozens of ripples, but this one is different in that it seems to be a little taller and to have a steeper slope, about 15 degrees on part of its face," said Mark Maimone, a JPL rover mobility engineer.

Engineers are using a lab and various sandy and powdery materials to simulate the situation at NASA's Jet Propulsion Laboratory in Pasadena, California. A test in a simulated sand dune proved to be no challenge for the test rover to escape, but a finer and looser material was needed for more realistic tests.

Raiding several home supply and hardware stores, scientists managed to find enough play sand, diatomaceous earth, and mortar clay powder to make more than two tons of simulated Mars sand.

"We needed to do tests using material more like what Opportunity is in, something that has a fluffier texture and cakes onto the wheels," said JPL rover engineer Rick Welch, who is leading the tests.

"We found that when the wheels dig in, the material we're using does stick to the wheels and fills the gaps between the cleats, but it doesn't stick when you're just driving over it. That's good because it's the same as what we see in the images from Opportunity," said Dr. Robert Sullivan of Cornell, a rover science team member who has helped to match the test sand.

Initial experiments seem to show that a test rover positioned like Opportunity can drive out after spinning its wheels at first. Of course, more testing will be done before any commands are sent to the Rover.

While waiting, Opportunity has been looking around with its cameras. It has traveled more than 3.32 miles in the 15 months since landing on Mars.

FMI: http://marsrovers.jpl.nasa.gov

Advertisement

More News

Airbus Racer Helicopter Demonstrator First Flight Part of Clean Sky 2 Initiative

Airbus Racer Demonstrator Makes Inaugural Flight Airbus Helicopters' ambitious Racer demonstrator has achieved its inaugural flight as part of the Clean Sky 2 initiative, a corners>[...]

Diamond's Electric DA40 Finds Fans at Dübendorf

A little Bit Quieter, Said Testers, But in the End it's Still a DA40 Diamond Aircraft recently completed a little pilot project with Lufthansa Aviation Training, putting a pair of >[...]

ANN's Daily Aero-Term (04.23.24): Line Up And Wait (LUAW)

Line Up And Wait (LUAW) Used by ATC to inform a pilot to taxi onto the departure runway to line up and wait. It is not authorization for takeoff. It is used when takeoff clearance >[...]

NTSB Final Report: Extra Flugzeugbau GMBH EA300/L

Contributing To The Accident Was The Pilot’s Use Of Methamphetamine... Analysis: The pilot departed on a local flight to perform low-altitude maneuvers in a nearby desert val>[...]

Classic Aero-TV: 'Never Give Up' - Advice From Two of FedEx's Female Captains

From 2015 (YouTube Version): Overcoming Obstacles To Achieve Their Dreams… At EAA AirVenture 2015, FedEx arrived with one of their Airbus freight-hauling aircraft and placed>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC