FAA Distributes InFO For ILS Procedures | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Recent Daily Episodes

Episode Date

AMA Drone Report

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday

Airborne-Thursday

Airborne-Friday

Airborne-Unmanned w/AUVSI

Airborne On ANN

AMA 04.27.17

Airborne
04.24.17

Airborne
04.25.17

Airborne
04.26.17

Airborne
04.27.17

Airborne
04.21.17

Airborne-Unmanned 04.25.17

Airborne-YouTube

AMA 04.27.17

Airborne
04.24.17

Airborne
04.25.17

Airborne
04.26.17

Airborne
04.27.17

Airborne
04.21.17

Airborne-Unmanned 04.25.17

Fri, Apr 27, 2012

FAA Distributes InFO For ILS Procedures

Aircraft And Equipment Moving Through Critical Areas Can Cause Glideslope Errors

The FAA has published an Information for Operators (InFO) bullitan remindng pilots of the potential for erroneous glideslope, and/or localizer indications caused by movement of aircraft or equipment through ILS critical areas.

The agency has recently received several reports from both pilots and air traffic controllers of instances of localizer, and/or glideslope fluctuations while the aircraft is navigating on the ILS. This well known phenomenon may occur when aircraft or vehicles are moving through the ILS localizer and/or glideslope critical areas, and is due to interference with the ILS signals. In several cases, the aircraft automation/autopilot followed ILS fluctuations causing the aircraft to pitch and roll excessively.

Air Traffic Control (ATC) protects the ILS critical areas when arriving aircraft are inside the outer marker/final approach fix (FAF) on an ILS approach, and the reported ceiling is less than 800 feet or visibility is less than 2 miles. The ILS critical areas are not protected for aircraft outside the FAF. In conjunction with the guidance found in the Aeronautical Information Manual (AIM), pilots should be continually aware of the conditions under which the critical area protections are imposed, and whether or not the ILS fluctuations are likely caused by movement through the ILS Critical Area, or an actual equipment malfunction. In all cases it is imperative that the pilot maintain positive aircraft control whether or not the autopilot is engaged, and coupled to the ILS.

The FAA recommends that directors of safety, directors of operations, directors of training, chief pilots, fractional ownership program managers, training managers, and operators of aircraft should:
Distribute ILS critical area information, reporting recommendations to ATC, and guidance to flightcrews.
Emphasize positive aircraft control with or without the use of automation.
Develop realistic training scenarios to include recognition, awareness, and operating procedures in relation to fluctuations of the localizer, and/or glideslope signal.

FMI: www.faa.gov

Advertisement

More News

AMA Drone Report 04.20.17: Phantom 4 Advanced, NJ NIMBYism, AMA-DJI Team Up

Also: AUVSI XPO17 LIVE!, Steady Drone Sales, Drone v Shotgun... DJI’s new Phantom 4 Advanced offers a more powerful camera and more upgraded controls. The new upgrades the or>[...]

The 2017 Planes of Fame Air Show At The Chino Airport Will Go On As Planned

But Tenants Who Filed Suit Will Seek Changes In Oversight For 2018 Show The group of plaintiffs filing suit against Planes of Fame have withdrawn the motion for a preliminary injun>[...]

Airborne 04.26.17: Kitty Hawk Flyer, Mooney CEO Departs, Part 23 Training

Also: Sun 'n Fun, North Dakota, Turbulence, Canadian Drones, Voyageur Aviation, Oxford Airport, Drone Classes A major player in the online world, Google’s Larry Page, has ent>[...]

Airborne 04.25.17: Vietnam Helicopter Museum, Gleim Virtual Cockpit, Av Police

Also: Airport Fight, Aero-Calendar, H145, A321neo, Emirates, Airspace Workshops, Jeppesen A claim of discrimination has been filed against Contra Costa County, CA by the Vietnam He>[...]

AD: Rolls-Royce plc Turbofan Engines

AD NUMBER: 2017-08-10 PRODUCT: All Rolls-Royce plc (RR) RB211-Trent 970-84, RB211-Trent 970B-84, RB211-Trent 972-84, RB211-Trent 972B-84, RB211-Trent 977-84, RB211-Trent 977B-84, a>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2017 Web Development & Design by Pauli Systems, LC