Mon, Mar 15, 2004
EAA, AOPA, T-34 Association Trying To Prevent Entire Fleet From
Being Grounded
Sport and GA advocacy groups are banding together to stop the
FAA from grounding the entire T-34 fleet. And it seems to be
working.
The FAA has now approved an alternative methods of compliance
(AMOC) submitted by the T-34 Association regarding revised
airworthiness directive (AD) 2001-13-18 R1 that deals with T-34
wing spar failures. The revised AD recently invalidated previous
AMOCs approved for the original AD because FAA feels they do not
address all four critical areas prone to fatigue cracks in the
aircraft’s wing spar assemblies. However, the T-34
Association submitted new AMOCs that incorporate inspection of the
rear spars.
Without approved AMOCs, a large number of the aircraft will
effectively be grounded when the revised AD goes into effect
Monday. Affected aircraft include Raytheon Aircraft Corp. Beech
Models 45 (YT-34), A45 (T-34A, B-45), and D45 (T-34B).
"We don't have hard numbers yet, but
it appears that a very high percentage of T-34s will be grounded,"
said AOPA Director of Regulatory and Certification Affairs Luis
Gutierrez. "The few shops that are authorized to do the necessary
work are already backlogged. These backlogs could lead to
significant delays in scheduling and extended down time for
aircraft owners."
In 1999 a T-34 engaged in mock aerial combat crashed. The
resulting examination revealed fatigue cracks at multiple locations
in the wings of the accident aircraft. As an interim fix, the FAA
issued an AD instating airspeed and G-load limitations while
Raytheon developed a "mandatory" service bulletin to inspect the
critical fatigue locations. In 2001 FAA finalized the AD mandating
wing-spar inspections and approved four AMOCs to address fatigue
concerns. Then in November 2003, a second T-34 crashed after
experiencing a separation of the right wing. Two people died in that Texas crash.
In both cases, the wing separated at the same point on the
aircraft. The only difference was that the second aircraft had an
additional separation point at the lower wing attach fitting not
inspected in any of the AMOCs issued for the original AD.
More News
The Industry Continues to be Rocked By Some Questionable Operations Recent investigations and a great deal of data has resulted in ANN’s SportPlane Resource Guide’s rep>[...]
Make Sure You NEVER Miss A New Story From Aero-News Network Do you ever feel like you never see posts from a certain person or page on Facebook or Instagram? Here’s how you c>[...]
Visual Approach Slope Indicator (VASI) An airport lighting facility providing vertical visual approach slope guidance to aircraft during approach to landing by radiating a directio>[...]
Airport Marking Aids Markings used on runway and taxiway surfaces to identify a specific runway, a runway threshold, a centerline, a hold line, etc. A runway should be marked in ac>[...]
Aero Linx: The Skyhawk Association The Skyhawk Association is a non-profit organization founded by former Skyhawk Pilots which is open to anyone with an affinity for the A-4 Skyhaw>[...]