AD NUMBER: 2015-08-08

PRODUCT: Certain Airbus Model A319-115, A319-133, A320-214, A320-232, and A320-233 airplanes.

ACTION: Final Rule

SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2014-26-53 and AD 2015-03-02 for the products listed above.

AD 2014-26-53 required repetitive detailed visual inspections to detect discrepancies of the wing lower skin surface and inboard main landing gear (MLG) support rib lower flange location fasteners and, depending on findings, accomplishment of applicable corrective action(s).

AD 2015-03-02 required repetitive detailed visual inspections of the outboard MLG support rib lower flange fasteners for discrepancies, and corrective actions if necessary. This new AD retains the repetitive detailed visual inspections to detect discrepancies of the fasteners located in the wing lower skin surface and inboard MLG support rib lower flange with extended compliance times and repetitive intervals, and accomplishment of applicable corrective actions.

This new AD also retains the repetitive detailed visual inspections of the outboard MLG support rib lower flange fasteners for discrepancies, and corrective actions if necessary. In addition, this new AD adds airplanes to the applicability. This AD was prompted by a determination that certain airplanes were missing from the applicability of AD 2014-26-53 and AD 2015-03-02 and that those airplanes may be affected by the unsafe condition addressed in AD 2014-26-53 and AD 2015-03-02.

The FAA is issuing this AD to detect and correct discrepancies of the fasteners at the external surface of the lower wing skin and inboard and outboard MLG support rib lower flanges, which could result in an airplane not meeting its maximum loads expected in service. This condition could result in structural failure.

DATES: This AD becomes effective May 12, 2015.

FMI: AD