Sun, Dec 19, 2021
AD 2021-16-19 Prompted By Reports Of In-Flight Engine Shutdowns
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes.
This AD was prompted by reports of in-flight engine shutdowns (IFESs); investigation results indicated that this could be caused by high altitude climbs at higher thrust settings on engines with certain thrust ratings. This AD requires amending the existing airplane flight manual (AFM) to incorporate a new limitation and revise certain normal procedures, as specified in a Transport Canada Civil Aviation (TCCA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products. This AD is effective January 21, 2022.
Supplementary Information: TCCA, which is the aviation authority for Canada, has issued TCCA AD CF-2020-41, issued October 15, 2020 (TCCA AD CF-2020-41) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD500-1A11 airplanes. The NPRM published in the Federal Register on April 16, 2021 (86 FR 20097).
The NPRM was prompted by reports of IFESs; investigations are ongoing to determine the root cause. Investigation results indicated that an IFES could be caused by high altitude climbs at higher thrust settings on engines with certain thrust ratings. The NPRM proposed to require amending the existing AFM to incorporate a new limitation and revise certain normal procedures, as specified in TCCA AD CF-2020-41.
The FAA is issuing this AD to provide the flightcrew with information and procedures for operation above 29,000 feet to prevent uncontained failure of an engine during an IFES, which could result in structural damage and reduced structural integrity of the airplane. See the MCAI for additional background information.
More News
With Testing Soon Complete, Launch Preparations Begin in Earnest Sierra Space's Dream Chaser has been put through the wringer at NASA's Glenn Armstrong Test Facility in Ohio, but w>[...]
Takeoff Roll The process whereby an aircraft is aligned with the runway centerline and the aircraft is moving with the intent to take off. For helicopters, this pertains to the act>[...]
“We’re proud of the hard work that went into receiving this validation, and it will be a welcome relief to our customers in the European Union. We couldn’t be mor>[...]
"Aircraft Spruce is pleased to announce the acquisition of the parts distribution operations of Wag-Aero. Wag-Aero was founded in the 1960’s by Dick and Bobbie Wagner in the >[...]
IDENT Feature The special feature in the Air Traffic Control Radar Beacon System (ATCRBS) equipment. It is used to immediately distinguish one displayed beacon target from other be>[...]