Boeing Changed Autopilot Switch Functions On 737 MAX | Aero-News Network
Aero-News Network
RSS icon RSS feed
podcast icon MP3 podcast
Subscribe Aero-News e-mail Newsletter Subscribe

Airborne Unlimited -- Most Recent Daily Episodes

Episode Date

Airborne-Monday

Airborne-Tuesday

Airborne-Wednesday Airborne-Thursday

Airborne-Friday

Airborne On YouTube

Airborne-Unlimited-05.06.24

Airborne-NextGen-04.30.24

Airborne-Unlimited-05.01.24 Airborne-AffordableFlyers--05.02.24

Airborne-Unlimited-05.03.24

Wed, May 15, 2019

Boeing Changed Autopilot Switch Functions On 737 MAX

Former Boeing Flight Control Engineer Says Alterations May Have Contributed To Two Accidents

A change in the function of two cockpit switches in Boeing's 737 MAX airplanes may have contributed to accidents in Indonesia and Ethiopia, according to a former Boeing flight control engineer.

Peter Lemme first called the changes into question on his blog, according to The Seattle Times. Lemme said that a change in the functionality of the switches meant pilots were not able to disable the MCAS on the airplane without also disabling the trim switches on the airplane's yoke.

On previous versions of the 737, the autopilot could be disengaged, but the trim controls would have remained active. One switch deactivated the autopilot, while the other disengaged the yoke trim switches. But on the MAX, both switches performed the same function, disabling both the autopilot and the electronic trim.

Boeing said in a statement that pilots have always been trained to flip both switches to deal with a "runaway" stabilizer, and the change to the MAX matched the established procedure. But the company kept both switches "for commonality of the crew interface. Boeing strongly disagrees with any speculation or suggestion that pilots should deviate from these long-established and trained safety procedures,” Boeing said.

While Lemme questions the change that appears to him to be "change for change's sake", aviation consultant Doug Moss, a former commercial airline pilot qualified in Boeing aircraft, told the paper that the procedure needs to be as simple as possible to prevent confusion in an emergency situation. Asking pilots to flip only one switch rather than both could add an unnecessary level of complexity to the procedure.

Boeing is continuing to work on a software update for the MCAS system on the 737 MAX, and the fleet remains grounded worldwide while that issue is addressed.

(Image from file)

FMI: Source report

Advertisement

More News

ANN's Daily Aero-Term (05.09.24): Hold Procedure

Hold Procedure A predetermined maneuver which keeps aircraft within a specified airspace while awaiting further clearance from air traffic control. Also used during ground operatio>[...]

ANN's Daily Aero-Term (05.06.24): Altitude Readout

Altitude Readout An aircraft’s altitude, transmitted via the Mode C transponder feature, that is visually displayed in 100-foot increments on a radar scope having readout cap>[...]

ANN's Daily Aero-Linx (05.06.24)

Aero Linx: European Hang Gliding and Paragliding Union (EHPU) The general aim of the EHPU is to promote and protect hang gliding and paragliding in Europe. In order to achieve this>[...]

Airborne-NextGen 05.07.24: AI-Piloted F-16, AgEagle, 1st 2 WorldView Sats

Also: Skydio Chief, Uncle Sam Sues, Dash 7 magniX, OR UAS Accelerator US Secretary of the Air Force Frank Kendall was given a turn around the patch in the 'X-62A Variable In-flight>[...]

Aero-News: Quote of the Day (05.07.24)

"The need for innovation at speed and scale is greater than ever. The X-62A VISTA is a crucial platform in our efforts to develop, test and integrate AI, as well as to establish AI>[...]

blog comments powered by Disqus



Advertisement

Advertisement

Podcasts

Advertisement

© 2007 - 2024 Web Development & Design by Pauli Systems, LC